Abstract:Gas drainage and water detection and release by drilling are essential to prevent gas and water disasters in China. The accurate drilling depth substantially affects gas drainage, water exploration, and safety problems. Consequently, it is essential to precisely monitor drilling depth by counting drill pipe to assure drilling efficacy. Based on increasingly sophisticated subterranean video surveillance technology, this paper leverages computer vision technology to implement precise drill pipe counting and calculates the corresponding drilling depth determined by the number of drill pipes. First, the operation of the drilling rig was examined, and the movement trajectory of the impact power head on the drilling rig feeding mechanism was estimated to quantify the number of drilling pipes. The optimized Retinex mine image enhancement algorithm is used to preprocess the initial underground image with issues including an unreliable light source, considerable light and shadow fluctuation, and blurred lens. Furthermore, the challenges of fixed scale and easy loss of target tracking in the Kernel Correlation Filter Algorithm are addressed by employing an adaptive scale algorithm and a re-detection approach to boost target location data accuracy. Eventually, the amount of drill pipes is calculated by the effective peak count of the displacement, the precise drilling depth is achieved, and the result is consistent with the actual drilling construction condition by evaluating the on-site drilling video. This study adopted computer vision tracking technology to tackle the challenge of calculating drilling depth and building progress accurately, ensuring the safe and efficient output of the mine. This study deals with the process simulation of an integrated system for energy production and valuable compounds recovery from spent coffee ground biomass and plasmix (non-recyclable plastic waste). The devised process consists of three maine units: a sub-critical water extraction column for the recovery of bio-compounds, an oxy-combustor of residual biomass and plasmix streams coupled with a production power energy unit, and a solid oxide electrolyzer (SOEC) for the production of pure H 2 and O 2 . The process was exhaustively analyzed from an energy, exergy, environmental and economic point of view. The results of the analysis provided energy and exergy efficiencies higher than 60%, and the environmental analysis (CO 2 -cycle analysis) demonstrated a significant advantage of the process with respect to other hydrogen production methods. Finally, the feasibility of a plant with no net Greenhouse Gas emissions was shown to markedly depend on the costs associated to renewable energy sources.

Research on Drilling Depth Measurement Technology based on Drilling Rig Parameter Monitoring

Intelligent Drilling Depth Monitoring System for Geotechnical Site Investigation

Accurate Measurement Method of Drilling Depth Based on Multi-Sensor Data Fusion

Hole Depth Measuring Device based on Mechanical Wave Reflection

Research on Measurement and Control System of Deep-Sea Self-Contained Static Cone Penetration Probe

MEASUREMENT-WHILE-DRILLING METHOD AND DEVICE FOR OBTAINING COAL SEAM GAS PARAMETER

A new method for monitoring coal stress while drilling process: theoretical and experimental study

A Study on the Dynamic Adjustment of Pressure Relief Gas Drainage Drilling in Mined-Out Areas

Research and Application of Downhole Drilling Depth Based on Computer Vision Technique

Experimental study on influence of drilling rate on drill pipe speed in drilling verification of deep mining

Research on Interface Monitoring Technology for Drilled Concrete Piles Based on Grey Correlation Cluster Analysis

Measurement-while-drilling method and device for assessing outburst risk of coal seam

Relationship model for the drilling parameters from a digital drilling rig versus the rock mechanical parameters and its application

Study on subsidence monitoring technology using terrestrial 3D laser scanning without a target in a mining area: an example of Wangjiata coal mine, China

Modern Drilling Management System Based on Field Data Monitoring.

An experimental investigation into the borehole drilling and strata characteristics

Key Technologies and Applications of Gas Drainage in Underground Coal Mine

Process Monitoring in Heavy Duty Drilling Rigs—Data Acquisition System and Cycle Identification Algorithms

Research on the key technology of distributed fiber monitoring in tunnel bottom drum

A realtime drilling risks monitoring method integrating wellbore hydraulics model and streaming-data-driven model parameter inversion algorithm

Study on mechanical characteristics of anchor drilling rig group for rapid excavating