Effect of the Spading Machine on Various Soil Parameters at Different Tillage Depths

Singh,Dogra,Manes,Parihar,Salem,Elbeltagi

DOI: https://doi.org/10.3390/su16114334

IF: 3.9

2024-05-22

Sustainability

Abstract:This study was carried out to investigate the effect of the spading machine as a sustainable tillage tool at different depths of tillage on soil parameters. The spading machine was evaluated for two independent parameters: soil type and depth of cut. The observed dependent parameters were the bulk density of soil, mean clod size, soil strength, torque requirement, fuel consumption, and cost of operation. The bulk density varied from 1.18 to 1.39 g/cm3, the mean clod size between 12.72 and 68.37 mm, the soil strength between 69 and 4714.5 kPa, the torque requirement between 206 and 344.62 N-m, the fuel consumption between 13.60 and 21.83 l/ha, and cost of operation ranged between 2670.37 INR/ha (34.71 USD/ha) and 3635.87 INR/ha (47.27 USD/ha). It was observed that with the increase in tillage depth, the dependent parameters were also increasing, except the cost of operation varied nonsignificantly. In comparison to the spading machine, other primary tillage tools resulted in higher bulk density and fuel consumption, whereas mean clod size and cost of operation were reported higher except for the rotary tillage tool. Thus, the spading machine could be a sustainable tillage tool for long-term agricultural goals.

environmental sciences,environmental studies,green & sustainable science & technology

What problem does this paper attempt to address?

The paper primarily discusses the impact of the spading machine as a sustainable tillage tool on soil parameters at different tillage depths. In the study, the spading machine was evaluated for two independent variables: soil type and tillage depth. The dependent parameters observed included soil bulk density, average clod size, soil strength, torque requirements, fuel consumption, and operational costs. The results showed that with the increase in tillage depth, all dependent parameters increased except for operational costs, which did not change significantly. Compared to the spading machine, other major tillage tools such as the disc plough and rotary tiller resulted in higher soil bulk density and fuel consumption, while the average clod size and operational costs were higher, except in the case of the rotary tiller.

The study points out that the spading machine, as a sustainable tillage tool, may be more suitable for long-term agricultural goals. It can effectively loosen the soil without causing soil compaction like rotary tillers, thus reducing energy requirements and improving soil pulverization. Moreover, the study also compared the performance of the spading machine with several other popular tillage tools, including moldboard ploughs, disc ploughs, and rotary tillers, in terms of soil bulk density, power requirements, average clod size, fuel consumption, and operational costs. The results indicate that the spading machine performs better than or at least not inferior to other tools in these aspects, especially in reducing soil bulk density, lowering fuel consumption, and controlling operational costs. Therefore, the spading machine can be considered an environmentally friendly and cost-effective tillage solution.