Abstract:It is difficult for the conventional single-stage compression auto-cascade refrigeration cycle to achieve higher refrigeration efficiency and lower refrigeration temperature, because the stream rich in high boiling point component from the phase separator bottom undergoes a single-stage compression process of high pressure lift ratio. Based on the concept of the evaporating temperature of the high/low boiling point component matching the grade compression of two streams from the phase separator, a component-based double-stage compression auto-cascade refrigeration (CDACR) cycle using R170/R600a is proposed in this paper. In the novel cycle, one dedicated compressor with two suction ports is used as the substitute for a conventional compressor with the sole suction port to realize grade compression process of the component of the refrigerant mixtures, and the stream enriched with high boiling point component from the separator bottom is sucked into the high-pressure suction port and undergoes the low-pressure-lift-ratio compression process, while the stream rich in low boiling point component from the separator top is sucked into the low-pressure suction port and executes the high-pressure-lift-ratio compression process, so as to cut down the compressor power consumption and obtain a lower refrigeration temperature. The mathematical model of the proposed cycle is developed to evaluate the thermodynamic performance of the system and comparisons with the conventional single-stage compression auto-cascade refrigeration (SCACR) cycle are also discussed. The results indicate that application of the component-based grade compression to the conventional auto-cascade refrigeration cycle dramatically improves the performance of the CDACR cycle, and there is optimum composition ratio of refrigerant mixtures for the CDACR cycle to obtain the highest coefficient of performance ( COP ). It is also shown that the performance of the CDACR cycle is significantly better than that of the SCACR cycle. As compared with those of the SCACR cycle, the compressor power consumption of the CDACR cycle decreases by 44.83%-53.17%, and its COP increases by 0.34–0.43, as the evaporating temperature at the evaporator outlet ranges from −60 °C to −40 °C. In addition, at the condenser outlet temperature in the range of 26 °C- 40 °C, the compressor power consumption for the proposed cycle is 37.74%-47.03% lower than that for the SCACR cycle, while COP of the CDACR cycle is 0.29–0.42 higher than that of the SCACR cycle.

Theoretical performance study on R600/R170 auto-cascade refrigeration cycle with mechanical pre-cooling

Performance evaluation on an internal auto-cascade refrigeration cycle with mixture refrigerant R290/R600a

Theoretical Investigation on the Performance of a Modified Refrigeration Cycle Using Binary Zeotropic Hydrocarbon Mixture R170/R290

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

Performance Analysis of a Modified Autocascade Refrigeration Cycle with an Additional Evaporating Subcooler

Performance of a Single-Stage Auto-Cascade Refrigerator Operating with a Rectifying Column at the Temperature Level of −60 °C

Performance Evaluation of a Modified Refrigeration Cycle with Parallel Compression for Refrigerator-Freezer Applications

Theoretical Study on a Modified Single‐stage Autocascade Refrigeration Cycle with Auxiliary Phase Separator

Theoretical investigation on an ejector–expansion refrigeration cycle using zeotropic mixture R290/R600a for applications in domestic refrigerator/freezers

Performance Analysis of an Advanced Ejector-Expansion Autocascade Refrigeration Cycle

Analyses of an Improved Double-Absorber Absorption Refrigeration System at Low Temperatures

Equivalent Cycle and Optimization of Auto-Cascade Absorption Refrigeration Systems

Theoretical Analysis of a Double Ejector-Expansion Autocascade Refrigeration Cycle Using Hydrocarbon Mixture R290/R170

Performance Analysis of a Modified Zeotropic Mixture (R290/R600) Refrigeration Cycle with Internal Subcooler for Freezer Applications

Study on the Performance of a Novel Waste Heat Recovery System at Low Temperatures

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Theoretical performance comparison for a regenerator-enhanced three-stage auto-cascade refrigeration system using different zeotropic mixed refrigerants

Performance Study of an Enhanced Ejector Refrigeration Cycle with Flash Tank Economizer for Low-Grade Heat Utilization

Proposal and performance study on a component-based double-stage compression auto-cascade refrigeration cycle

Performance Study on a Low-Temperature Absorption–compression Cascade Refrigeration System Driven by Low-Grade Heat

Investigations on Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants