Recovery of sulphur dioxide by converter dust synergistic coke decomposition of phosphogypsum

Dong Ma,Qinhui Wang,Zhihua Tian,Bin Zhang,Guilin Xie
DOI: https://doi.org/10.1016/j.ces.2024.119814
IF: 4.7
2024-01-26
Chemical Engineering Science
Abstract:To further improve the decomposition ratio and sulfur dioxide mass yield of coke-reduced solid waste phosphogypsum (PG), converter dust (CD) is proposed as a novel additive. The effects of raw material ratio, time and temperature for roasting on the decomposition process of PG were inspected by simulation calculations and fluidized bed experiments. It turns out that the optimized reaction conditions are Fe 3 O 4 /Ca of 0.6, C/Ca of 0.4 at 1100 °C for 24 min, under which the PG decomposition ratio and SO 2 mass yield are 99.56 % and 97.64 %, respectively. The addition of CD is able to reduce the initial reaction temperature from 975 °C to 914 °C, and promote the release of SO 2 . Kinetic analysis shows the mechanistic equation for this process is obtained as G(α) = [−ln(1 − α)] 3/2 , indicating that the decomposition reaction mechanism is a crystal nucleation and growth-controlled process. The chemical mechanism of the process is that coke and Fe 3 O 4 in the CD convert CaSO 4 to the intermediate CaS, and Fe 3 O 4 is oxidized to Fe 2 O 3 . Then CaS and CaSO 4 continue to react with Fe 2 O 3 to form Ca 2 Fe 2 O 5 and SO 2 . The presence of Fe 2 O 3 accelerations the rate of CaS and CaSO 4 roasting reaction and lowers the reaction temperature. Meanwhile, the self-decomposition of PG also produces CaO and SO 2 . Finally, a process for SO 2 recovery from CD synergized with coke decomposition of PG is proposed.
engineering, chemical
What problem does this paper attempt to address?