Abstract:Abstract Chemical enhanced oil recovery (cEOR) relies on the interactions of the injected chemicals with the surface-active components (SACs) of the oil-in-place and the rock surface to induce favorable physico-chemical changes. In this study, we investigate the effect of oil composition on the performance of low salinity waterflooding (LSWF) in carbonate rocks using an integrated experimental approach. In addition, we assess the extent of usefulness of total acid number (TAN) as an oil screening criterion for LSWF application in carbonate reservoirs by using model oils that have different SACs, but the same TAN. A variety of characterization techniques including thermal gravimetric analysis (TGA), attenuated total reflectance (ATR-FTIR) and zeta potential (ζ) are performed to investigate the molecular-scale effect of oil chemistry on rock-oil-brine interactions during LSWF. Sessile drop contact angle measurements are also performed to quantify the influence of different SACs on the wettability of carbonate rock samples. Concurrently, coreflood experiments are performed to evaluate the effect of oil composition on the performance of LSWF in carbonate rocks in terms of Darcy-scale oil recovery. Results of this study show that oil chemistry significantly influences the performance of LSWF at all scales. Different molecular-scale interactions are observed in the presence of different SACs owing to differences in their affinity to the rock surface, strength of adsorption, solubility in brine, as well as their distinct pore-scale wetting abilities. These differences translate into significant variation in Darcy-scale oil recovery. In addition, carboxylic acid chain length is found to affect the amount of SACs adsorbed onto carbonate rocks during aging. Carboxylic acid chain length also affects the strength of adsorption, which in turn impacts the magnitude of wettability alteration during LSWF. Further, partitioning of SACs in brine is observed to influence the type of interactions taking place in the rock-oil-brine system, where carboxylate salts (soaps) generated in-situ are detected only in the presence of certain oil-brine pairs but not in the presence of others. Solubility of SACs in brine is also found to promote water-wetness. As a result, significant differences in the rate of oil recovery and ultimate recovery are observed when displacing four oils by the same low salinity brine at similar experimental conditions. Finally, the value of TAN is found to be insensitive to the type of acidic SACs present in the oil phase as long as they are monoprotic and their molar concentration in the oil is the same. Even within the same class of SACs, namely carboxylic acids, the usefulness of TAN is limited in differentiating between the type and molecular structure of the acid (i.e.: straight chain versus aromatic).

Studies of Surface and Adsorption Activity of Modified Lignosulfonate Reagent for Regulation of Drilling Mud Parameters

Investigation of the Possibility of Obtaining a Lignosulfonate Reagent Based on Complex Compounds to Regulate the Parameters of the Drilling Mud

Obtain and Application of Surface-active Substance on the Base of Products Refination of Cotton Seed Oil

Modification of clay raw materials to optimize slip casting

The Effects of Organically Modified Lithium Magnesium Silicate on the Rheological Properties of Water-Based Drilling Fluids

Acylated Inulin as a Potential Shale Hydration Inhibitor in Water Based Drilling Fluids for Wellbore Stabilization

Improving the performance of bentonite-free water-based mud with lignin-based biopolymer

Sodium lignosulfonate as sacrificial agent and effectiveness in reducing CTAB cationic adsorption onto kaolinite

Synthesis of novel modified acrylamide copolymers for montmorillonite flocculants in water-based drilling fluid

Thermoresponsive Bentonite for Water-Based Drilling Fluids

Revisiting bitumen-clay interaction using molecular dynamics: The role of surfactants

Utilizing Lignosulfonate from Coconut Husk as Sacrificial Agent to Reduce Surfactant Adsorption

Systematic Investigation of the Physicochemical Properties of Eco-Friendly Biobased Anionic-Nonionic Surfactants for Enhanced Oil Recovery

Performance of sodium lignosulfonate as thickening additive in compositions for matrix acidizing of bottom hole zone

Solution Behaviours and Adsorption Characteristics of Sodium Lignosulfonate under Different Ph Conditions

Amphoteric tetramer as a filtration-loss reducer in low-solid phase water-based drilling fluids under high thermal-saline conditions

Synergistic inhibition of polyethylene glycol and potassium chloride in water-based drilling fluids

Studying the Effect of Geological Formation and Formation Water on Drilling Fluid Performance (Case Study)

Effect of Oil Chemistry on the Performance of Low Salinity Waterflooding: An Integrated Experimental Approach

INVESTIGATION OF MODIFIED POLYACRYLAMIDE FOR OIL DISPLACEMENT

Study on Synthesis and Performance of Lignin Polyether Sulfonate Surfactants for Enhanced Oil Recovery