Abstract:Advances in Structural Engineering, Ahead of Print. The external excitations, interface forces and responses at the interface degrees-of-freedom are normally required in many existing substructural condition assessment methods, while they are difficult or even impossible to be accurately measured. To address this issue, a digital twin framework for output-only substructural damage identification with data fusion of muti-type responses is proposed in the present paper. First, heterogeneous responses including displacements, strains and accelerations from the target substructure are measured and divided into two sets. The multi-type responses in measurement set 2 are reconstructed with the first set of responses and transmissibility matrix in time domain. Then, a recovery method is introduced to obtain angular displacements from translational displacements and strains, to acquire angular accelerations from translational accelerations and the second order derivatives of strains by continuous wavelet transform. The recovered angular displacements and angular accelerations are involved into the evaluation of objective function. Besides, to avoid the single and monotonous search operation of traditional optimization algorithms, a reinforced learning-assisted Q-learning hybrid evolutionary algorithm (QHEA) by integrating Q-learning algorithm, differential evolution algorithm, Jaya algorithm, is developed as a search tool to solve the optimization-based inverse problem. The most suitable search strategy among DE/rand/1, DE/rand/2, DE/current-to-best/1, Jaya mutation in each iteration is selected and implemented under the guidance of Q-learning algorithm. Numerical studies on a three-span beam structure are performed to verify the effectiveness of the proposed approach. The results demonstrates that the proposed output-only substructural damage identification approach can accurately identify locations and severities of multiple damages even with high noise-polluted responses.

Data driven structural damage assessment using phase space embedding and Koopman operator under stochastic excitations

A Data‐driven Combined Deterministic‐stochastic Subspace Identification Method for Condition Assessment of Roof Structures Subjected to Strong Winds

On the Use of Distance Measures in the Phase Portrait for Damage Localisation and Severity Assessments

Structural damage identification using static test data and changes in frequencies

Structural damage detection via phase space based manifold learning under changing environmental and operational conditions

Damage Assessment of Structures Using Modal Test Data

Test Analysis of Detection of Damage to a Complicated Spatial Model Structure

Damage Assessment Using The Energy Dissipation Ratio Of Acceleration Signals

Experimental Study of Structural Damage Identification Based on Modal Parameters and Decay Ratio of Acceleration Signals

Structural Damage Identification using Modal Data. I: Simulation Verification

Structural damage identification using system dynamic properties

Two-stage damage detection to a benchmark structure using ambient data

An Output‐only Structural Condition Assessment Method for Civil Structures by the Stochastic Gradient Descent Method

Data-Driven Structural Health Monitoring: Leveraging Amplitude-Aware Permutation Entropy of Time Series Model Residuals for Nonlinear Damage Diagnosis

Structural damage detection based on cross-correlation function with data fusion of various dynamic measurements

Detecting localized damage in cantilevered structures under nonstationary ambient excitations via Gabor spectral mode transmissibility functions

Using a single sensor for bridge condition monitoring via moving embedded principal component analysis

A data fusion-based approach for structural damage detection with distributed long-gauge strain measurements

Substructural damage identification in a digital twin framework using heterogeneous response reconstruction

Structural Damage Detection Based on Structural Macro-Strain Mode Shapes Extracted From Non-Stationary Output Responses

Post-earthquake structural damage assessment and damage state evaluation for RC structures with experimental validation