Abstract:Dehydration of solvents using hydrophilic polyvinylalcohol pervaporation membranes is a well-established technology. However, these polymeric membranes may not be suitable for applications involving high water concentrations or applications containing harsh solvents like dimethylformamide due to membrane stability problems and swelling effects. These applications are commonly encountered in the pharmaceutical industry. The recent development of solvent and temperature-resistant, hydrophilic zeolite NaA membranes has made it possible to overcome the above limitations of hydrophilic polymeric membranes. In this study, experiments were conducted with various alcohol–water (methanol–water, ethanol–water, isopropanol–water) mixtures and with dimethylformamide–water mixture over a wide range of temperatures (25–70°C) and solvent concentrations (0–100wt.%). The total flux for ethanol–water mixture was found to vary from 2 to 0.05kg/m2/h at 60°C as the feed solvent concentration was increased from 0 to 100wt.%. The total flux for methanol–water and isopropanol–water mixtures was observed to vary from 2 to 0.15 and 2 to 0.21kg/m2/h, respectively, as the alcohol concentration was changed from 0 to 100wt.%. The total flux was also found to remain approximately constant up to 70wt.% alcohol in the feed. Both water to ethanol and water to isopropanol separation factors were observed to lie between 1000 and 5000 over a wide range of solvent concentrations. The water to methanol separation factor was found to lie in the range of 500–1000. The total flux behavior was also found to be very similar for the other solvent–water mixtures such as acetone–water and ethyl acetate–water. The ionic Na+ sites in the NaA zeolite matrix play a very important role in the water transport through the membrane. These sites act both as water sorption and transport sites. The surface diffusion of water occurs in an activated fashion on these sites. The precise micropore structure of the zeolite cage helps in a partial molecular sieving of the large solvent molecules leading to high separation factors. The zeolite membrane active layer may contain certain non-zeolitic interstitial pores with preferential water sorption. One of the reasons for the high hydrophilicity of zeolite NaA is the strong electrostatic interaction between ionic sites and the water molecule (due to its highly polar nature). A high degree of hydrophilicity of the zeolite membrane is suggested from a pure water sorption value of 0.6g/g zeolite. The detailed interpretation of this result, however, requires consideration of both true zeolitic microcavity uptake as well as interstitially held water between crystallites. Any molecule highly polar in nature (indicated by a high dipole moment or dielectric constant) is expected to strongly interact with the ionic sites in the cage. In fact, this effect was indirectly observed for the dimethylformamide–water mixture. The water flux in this case, was found to be lower than that for alcohol–water mixtures thus indicating the possibility of competitive sorption of dimethylformamide molecules on the zeolite sites. A linear correlation was found to exist for the pure water flux through the membrane and the partial pressure driving force of the water. The other alcohol–water mixtures followed this trend reasonably well. The use of zeolite membranes for dehydration of complex solvent streams has been actually demonstrated by experiments with a synthetic ethyl acetate mixture. Thus, the use of inorganic zeolite membranes for difficult solvent separations seems to be very attractive.

Pervaporation Separation of Isopropanol/Water Using Zeolite Nanosheets: A Molecular Simulation Study

Process Design of Continuous-Flow Pervaporation Separation for Alcohol Dehydration

Solvent-Less Vapor-Phase Fabrication of Membranes for Sustainable Separation Processes

Process design and optimization of continuous-flow pervaporation technique for the dehydration of ethanol-water mixture

Adsorption-driven Reverse Osmosis Separation of Ethanol/Water Using Zeolite Nanosheets

Zeolite Mfi Membranes for Separation of Ethanol/Water Mixture

Application of silicon rubber pervaporation membrane to butanol fermentation

Asymmetric nanoporous membranes for ethanol/water pervaporation separation and their design

Polyol grafted thin film nanocomposite membrane: Enhanced pervaporation performance for isopropanol dehydration

Separation of Alcohol−Water Solutions by Distillation Through Hollow Fibers

Research progress of separation technologies for alcohol-water system

Energy Efficient and Environmentally Friendly Pervaporation-Distillation Hybrid Process for Ternary Azeotrope Purification.

Economic and Environmental Evaluation for Purification of Diisopropyl Ether and Isopropyl Alcohol Via Combining Distillation and Pervaporation Membrane

Multi-objective optimization and control strategy for extractive distillation with dividing-wall column/pervaporation for separation of ternary azeotropes based on mechanism analysis

Pervaporation of modified composite membrane for dehydration of micro-water isopropanol

Ethanol Perm-Selective Membranes by Pervaporation

Environmental evaluation and comparison of hybrid separation methods based on distillation and pervaporation for dehydration of binary alcohol mixtures with life cycle, PESTLE, and multi-criteria decision analyses

Energy-efficient heterogeneous azeotropic distillation coupling with pressure swing distillation for the separation of IPA/DIPE/Water mixture

Pervaporative poly(vinyl alcohol)/H‐β zeolite mixed matrix membranes for dewatering C2–C3 alcohols

Porous Organic Cage Membranes for Biofuel Purification via Pervaporation: A Molecular Simulation Study

Pervaporation of alcohol–water and dimethylformamide–water mixtures using hydrophilic zeolite NaA membranes: mechanisms and experimental results