Abstract:Abstract Receiver autonomous integrity monitoring (RAIM) fault monitoring and identification requires first to judge the geometric distribution of currently visible satellites based on performance indicators and to determine whether it is suitable for integrity monitoring, that is, to judge the availability of the RAIM algorithm. With the rapid development of the global navigation satellite system (GNSS), the possibility of dual-satellite faults and multiple-satellite faults in GNSS navigation and positioning has greatly increased. The existing literature mainly focuses on RAIM availability evaluation for single-satellite fault or dual-satellite faults, ignoring the occurrence possibility of multiple-satellite faults, and thus there is no unified RAIM availability evaluation model. To this end, we use the characters of the quadratic matrix to derive a generalized model of RAIM availability evaluation, and the model is suitable for situations of single-, dual- and multi-satellite faults. Based on the observation data of Beidou Navigation Satellite System (BDS) from 332 International GNSS Service (IGS) stations distributed globally on 24 March 2021 and the global ephemeris file, the global RAIM availability of BDS is evaluated. The results show that the generalized model of RAIM availability evaluation has a rigorous derivation process, strong applicability and easy implementation. When the cutoff elevation angle is greater than 5°, the average number of BDS visible satellites at 332 IGS stations worldwide is 12.289 and the average geometry dilution of precision value is 8.090. This can fully meet RAIM availability evaluation and integrity monitoring requirements at most IGS stations and regions. The RAIM availability of triple-satellite faults is lower than that of dual-satellite faults, and the RAIM availability of dual-satellite faults is lower than that of single-satellite fault. For the three different faults, the RAIM availability cannot fully satisfy the four stages in aviation all over the world. Among them, the RAIM availability is highest in the en-route (oceanic/continental low density) stage for all three types of faults, which is 93.146%, 74.848%, and 67.576%, respectively, while the non-precision approach stage has the lowest RAIM availability, which is 78.193%, 13.636%, 3.333% for the three types of faults, respectively.

An Improved RAIM Availability Assessment Method Based on the Characteristic Slope

Availability evaluation and optimisation of advanced receiver autonomous integrity monitoring fault detection and exclusion considering temporal correlations

Optimized key parameters on RAIM performance for vertically guided approaches

An Improved Adaptive Simulated Annealing Particle Swarm Optimization Algorithm for ARAIM Availability

RAIM method for improvement on GNSS reliability and integrity

GPS RAIM: Statistics Based Improvement on the Calculation of Threshold and Horizontal Protection Radius

Development and evaluation of a generalized model of RAIM availability for single-, dual- and multi-satellite faults

Improved protection level for the solution-separation ARAIM based on worst-case fault bias searching

Worst-Case Integrity Risk Sensitivity for RAIM with Constellation Modernization

Impact Analysis of Satellite Geometry Variation on ARAIM Integrity Risk over Exposure Interval

Robust Resource Allocation Algorithm for RIS-Assisted MISO Systems with Eavesdroppers

Assessing Slope Stability with an Improved 3D Numerical Manifold Method

A PRE-IE-AFOSM-based approach for the reliability analysis of rock slope stability

Application of Supplementary Sampling Method in Slope Reliability Analysis

Slope Failure Risk Assessment Considering Both the Randomness of Groundwater Level and Soil Shear Strength Parameters

3D slope reliability analysis based on the intelligent response surface methodology

Towards a Framework of Operational-Risk Assessment for a Maritime Autonomous Surface Ship

RAIM Availability Augmentation Algorithm in Position and Velocity Domain Aided by Precise Forecasted Time and Frequency

Implementation and Performance Analysis of Constellation Dynamic Selection in Multi-Constellation RAIM

An Equivalent-Satellite Method Exploiting Spatial Distribution to Reduce Fault Modes for ARAIM

Research on Multi Satellite Failure Detection and Recognition Method of Satellite Navigation RAIM