Abstract:Sulfur dioxide (SO2) is a toxic gas at low parts-per-million (ppm) concentrations, with a permissible exposure limit (PEL) of 2 ppm. Its detection is mandatory, particularly in the fields of occupational health and safety, and environmental pollution. In this work, ppm concentration detection of sulfur dioxide was performed in six room temperature ionic liquids (RTILs), as well as on two different electrode materials - platinum and gold - and with two different electrode geometries, i.e. macro thin-film electrodes (TFEs) and microarray thin-film electrodes (MATFEs). Calibration curves were established for 10-200 ppm SO2 using cyclic voltammetry to determine the optimum combination of RTIL, electrode surface and geometry for the sensing. The RTIL 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonium)imide ([C4mpyrr][NTf2]) with a platinum thin-film electrode was found to give the best response due to the relatively low viscosity of the RTIL combined with the high sensitivity and a clean blank response. On MATFEs, deposited sulfur particles - confirmed using scanning electron microscopy (SEM) coupled to an energy dispersive spectrometer - were found to passivate and block some of the microholes, leading to unstable long-term chronoamperometric responses. To the best of our knowledge, this is the first observation of sulfur deposition from SO2 reduction in aprotic ionic liquids. Consecutive additions of 2 ppm SO2 were studied in [C4mpyrr][NTf2] on a TFE using long-term chronoamperometry, showing excellent reproducibility upon successive additions. This demonstrates that small volumes of RTILs can be combined with miniaturized, low-cost TFEs and applied for the reliable and continuous monitoring of sulfur dioxide gas at concentrations lower than the permissible exposure limit of 2 ppm.

On-site portable detection of gaseous I2 using green and pollution-free electrochemical methods

Preparation of Nano-Cu/Ionic Liquid-Polyaniline Modified Glassy Carbon Electrode and Its Application in Electrochemical Analysis of H2o2

On-site portable detection of gaseous methyl iodide using electrochemical method

A Novel Lateral Flow Strip Based on DNA-Functionalized Gold Nanoparticles for On-site Detection of Mercury (II) Ions

Detection of Nitrite Based on Ni/Ag/MWNTs Modified Electrode

Ionic Polyimine Based Composite Membrane with Inductive and Complexation Synergistic Effects for Sensitive and On‐Site Fluorescent Detection of Volatile Iodine

Determination of methyl parathion by solid-phase extraction on an ionic liquid–carbon nanotube composite electrode

Sensitive Detection of Sulfide Ion Based on Fluorescent Ionic Liquid–Graphene Quantum Dots Nanocomposite

Fabrication and design of a toxic gas sensor based on polyaniline/titanium dioxide nanocomposite film by layer-by-layer self-assembly

Portable purge and trap-microplasma optical emission spectrometric device for field detection of iodine in water

Nitrogen-doped graphene quantum dots based fluorescent probe for highly sensitive detection of thiosulfate anion and oxidative compounds

Ionic liquid-assisted synthesis of In2O3 nanoparticles for ppb-level NO2 sensing at low temperature

AIEgen-functionalized Metal-Organic Gel As a Bifunctional Platform for Efficient Adsorption and Portable Sensing of Gaseous Iodine.

An innovative fluorescent probe for the detection of cyanide - enhanced sensitivity by controlling its electrostatic potential and suitable for applications such as cell imaging and food analysis

Species-Selective Detection of Volatile Organic Compounds by Ionic Liquid-Based Electrolyte Using Electrochemical Methods

Portable Solid Phase Micro-Extraction Coupled With Ion Mobility Spectrometry System For On-Site Analysis Of Chemical Warfare Agents And Simulants In Water Samples

Fluorescent Probe for Detection of Hg2+ and S2-Based on N-Doped Ti3C2 MXene Quantum Dots

In Situ Bismuth Ion Exchange Plating Micro-Electrochemical Sensor Based on Laser-Induced Graphene for Trace Cd2+ and Pb2+ Detection

Portable Copper-Based Electrochemical SERS Sensor for Point-of-Care Testing of Paraquat and Diquat by On-Site Electrostatic Preconcentration

Detection of sulfur dioxide at low parts-per-million concentrations using low-cost planar electrodes with ionic liquid electrolytes

Gasoline residue-prepared carbon dots embedded metal–organic frameworks for selective and sensitive detection of sulfide ions