Abstract:We investigate the perturbation dynamics in a supersonic shear layer using a combination of large-eddy simulations (LES) and linear-operator-based input-output analysis. The flow consists of two streams-a main stream (Mach 1.23) and a bypass stream (Mach 1.0)-separated by a splitter plate of non-negligible thickness. We employ spectral proper orthogonal decomposition to identify the most energetic coherent structures and bispectral mode decomposition to explore the nonlinear energy cascade within the turbulent shear layer flow. Structures at the dominant frequency are also obtained from a resolvent analysis of the mean flow. We observe higher gain at the dominant frequency in resolvent analysis, indicating the dominance of Kelvin-Helmholtz (KH) instability as the primary disturbance energy-amplification mechanism. To focus on realizable actuator placement locations, we further conduct an input-output analysis by restricting a state variable and spatial location of an input and output. Various combinations of inputs and output indicate that the splitter plate trailing surface is the most sensitive location for introducing a perturbation. For all combinations, the KH instability plays a key role in amplification, which reduces significantly as the input location is moved upstream relative to the splitter plate trailing edge. Furthermore, two-dimensional nonlinear simulations with unsteady input at the upper surface of the splitter plate show remarkable similarities between pressure modes obtained through dynamic mode decomposition and those predicted from linear input-output analysis at a given frequency. This study emphasizes the strength of linear analysis and demonstrates that predicted coherent structures remain active in highly nonlinear turbulent flow. The insights gained from the input-output analysis can be further leveraged to formulate practical flow control strategies.

Extending Closed-Loop Control of Two-Dimensional Supersonic Boundary-Layer Instabilities Beyond a Single Operating Point

Reactive control of 2 nd Mack mode in a supersonic boundary layer with freestream velocity/density variations

Reactive control of second Mack mode in a supersonic boundary layer with free-stream velocity/density variations

Adjoint-based linear sensitivity of a supersonic boundary layer to steady wall blowing–suction/heating–cooling

Adjoint-based linear sensitivity of a hypersonic boundary layer to steady wall blowing-suction/heating-cooling

Open-loop control of noise amplification in a separated boundary layer flow

Feedback control of boundary layer Tollmien-Schlichting waves using a simple model-based controller

Disturbance Observer-Based Backstepping Terminal Sliding Mode Aeroelastic Control of Airfoils

Robust Linear Parameter-Varying Control for Longitudinal Maneuvering Flight of Air-Breathing Hypersonic Vehicle

Improved residual mode separation for finite-dimensional control of PDEs: application to the Euler-Bernoulli beam

High-speed microactuation in a supersonic dual-stream jet flow

Unsteady control of supersonic turbulent cavity flow based on resolvent analysis

Control of linear instabilities in two-dimensional airfoil boundary layers

Experimental Study of Linear Closed-Loop Control of Subsonic Cavity Flow

Reduced-Order Modelling and Closed-Loop Control of the Cylinder Wake

Second-order Terminal Sliding Mode Control for Hypersonic Vehicle in Cruising Flight with Sliding Mode Disturbance Observer

Multi-Input Multi-Output Robust Control of Turbofan Engines Based on Off-Equilibrium Linearization Linear Parameter Varying Model

Observer-based Dynamic Surface Control for High-Performance Aircraft Subjected to Unsteady Aerodynamics and Actuator Saturation.

Active Control of Combustion Instabilities Using Model-Based Controllers

Responses to Disturbance of Supersonic Shear Layer: Input-Output Analysis

Observer based incremental backstepping terminal sliding-mode control with learning rate for a multi-vectored propeller airship