Abstract:Boron (B), normally present in ground water and sea water, is a vital micronutrient for plants, but is also toxic in excessive amounts. Under typical conditions, aqueous boron is present as boric acid (H3BO3), which is uncharged, making B particularly challenging to remove by mechanisms commonly applicable to removal of trace constituents. Adsorption of B onto aluminum hydroxide solids (Al(OH)3(s)) generated using aluminum-based electrocoagulation (EC) is a promising strategy for B removal. Infrared spectroscopy analysis indicated complexation of B(OH)3 with aluminum hydroxide solids via surface hydroxyl groups, while X-ray and infrared spectroscopy results indicated that the structure of the Al(OH)3(s) was influenced both by EC operating conditions and by water quality. A linear adsorption model predicted B removal well when initial concentrations were lower than 50 mg/L, but fit the experimental data poorly at higher initial B concentrations. The Langmuir adsorption model provided a good fit for a broader range of initial B concentrations (5-1000 mg/L). Factors affecting B adsorption during the EC process, including current intensity, Al dissolution rate, boron concentration, pH, and total dissolved solid (TDS), were investigated. Increasing current intensity initially led to a higher Al dissolution rate, and therefore higher B adsorption, but there was a limit, as further increases in current intensity caused rapid formation of Al(OH)3(s) having a large particle size and a low capacity to complex B. Boron removal decreased as its concentration increased. The best removal of B occurred at pH 8, corresponding to a slightly positive zeta potential for aluminum hydroxide and a small but significant fraction of negatively charged B species. Higher TDS concentrations facilitated the use of higher current intensities, i.e., the limit on the effective Al dissolution rate increased with increasing TDS. Two real water samples (river water and oilfield produced water) spiked with B were treated using EC, resulting in up to 50% B removal from river water (C0 = 10 mg/L, current = 0.2 A) in 2 h, and 80% B removal from produced water (C0 = 50 mg/L, current = 1.0 A) in 2 h.

Ionic complexation, metal coordination, and physiological stress effects of polyborate

Boron contamination and its risk management in terrestrial and aquatic environmental settings

Effective Removal of Boron from Aqueous Solutions by Inorganic Adsorbents: A Review

Preparation and Application of an Innovative Integrated Agent Product for Phosphorus Control and Oxygen Release

Effect of borate buffer on organics degradation with unactivated peroxymonosulfate: Influencing factors and mechanisms

Phosphorus Co-Existing in Water: A New Mechanism to Boost Boron Removal by Calcined Oyster Shell Powder

Phosphonated Polyetheramine-Coated Superparamagnetic Iron Oxide Nanoparticles: Study on the Harsh Scale Inhibition Performance of Calcium Carbonate and Barium Sulfate

Degradation of Bisphenol S by Peroxymonosulfate Activation Through Monodispersed CoFe2O4 Nanoparticles Anchored on Natural Palygorskite

Boron removal by electrocoagulation: Removal mechanism, adsorption models and factors influencing removal

An updated review on boron removal from water through adsorption processes

Activation of peroxymonosulfate by palygorskite-mediated cobalt-copper-ferrite nanoparticles for bisphenol S degradation: Influencing factors, pathways and toxicity evaluation

Preparation and application of porous functional polymers for boron removal in seawater desalination by a mild and free-organic solvents process

Sustainable boron removal from aqueous solutions using pomegranate peel adsorbents: A comprehensive study on isotherms, kinetics, and thermodynamics

Effects of phosphate-enhanced ozone/biofiltration on formation of disinfection byproducts and occurrence of opportunistic pathogens in drinking water distribution systems

Effective boron removal from synthetic wastewater by multi-stage calcium-based chemical oxo-precipitation process

A Synergistic Approach to Develop Sustainable Scale Inhibitors Combining Amino Acids and Polyphosphates

Borate configuration and surface pre-functionalization effects on the boronizing behavior and corrosion inhibition

Boron-doped biochar-nano loaded zero-valent iron to activate persulfate for the degradation of oxytetracycline

Impact of permanganate with polyaluminium chloride on algae-laden karst water: Behaviors and disinfection by-products control

Enhancement mechanism for boron removal at high anodic polarization potential during electrocoagulation using iron-based materials

Laboratory Study of a New Kind of Low Phosphorus Corrosion and Scale Inhibitor in Circulating Cooling Water System