Abstract:Due to their mixed conducting properties as well as their electronic, crystallographic, and chemical versatility, perovskite-based oxides have been shown to be very promising electrocatalysts for CO 2 conversion to syngas in high temperature (600 – 1000 °C) solid oxide electrolysis cells (SOECs) integrated with renewable energy resources. In addition to generating fuels and value-added chemicals, CO 2 reduction (CO2RR) in SOECs serves to lower atmospheric CO 2 emissions. La-based (1) perovskite oxides have been intensively used instead of precious metals and metal-cermet materials (e.g., Ni-YSZ, Ni-GDC) for CO 2 electrolysis in high temperature SOECs. The effect of the dopant cations on the electrocatalytic performance and degradation have also been investigated since the segregation of dopants can reconstruct the surface (2). Our team has been actively developing the family of La 0.3 a 0.7 Fe 0.7 Cr 0.3 O 3−δ (LMFCr, where M = Ca or Sr) for CO 2 reduction (3,4) showing that CO 2 RR is more active than CO oxidation, and that the catalyst is also highly active on the air side. More recently, we have shown that Fe-Ni exsolved LCFCr significantly improves the rate of CO oxidation (5), while hardly changed CO2RR. However, a full atomistic scale understanding of the CO 2 reduction mechanism and related degradation issues, such as dynamic changes of the surface composition as a function of operating conditions, does not yet exist. The oxygen vacancy concentration (V 0 ) and surface termination of the perovskite material are important factors that affect the CO2RR, as shown recently (6) utilizing DFT methods. In this study, we used Density Functional Theory (DFT) to explore the energetics of the catalytic conversion of CO 2 to CO on LMFCr (M = Sr, Ca) perovskite surfaces. The DFT calculations were then used to generate datasets of optimized lattice structures, including point defects, equations of state, surface energies, and surface CO 2 /CO interactions in order to develop reactive force fields (ReaxFF). The datasets were optimized by using an evolutionary algorithm, CMA-ES, and validated in order to explore the dynamics of the catalytic conversion process under varying conditions, such as temperature, inlet CO 2 /CO gas ratio, the perovskite surface composition and applied electrical field. Our results have shed light on reaction steps involving adsorption of CO 2 at high temperatures, C=O bond activation, and the dominant intermediates as transition states during the conversion process and their role in generating CO. These observations will serve as a foundation to determine the elementary reaction steps involved in the CO 2 splitting mechanism on LMFCr at high temperatures. Furthermore, this study will enable us to determine the optimal conditions for the reaction to occur and shed light on possible surface degradation mechanisms, allowing future optimization of the stability and catalytic activity of these promising perovskites. ACKNOWLEDGMENTS This computational research was supported by the Canada First Research Excellence Fund (CFREF), while the platforms for this computational work were provided by Westgrid (https://www.westgrid.ca) and Compute Canada (https://www.computecanada.ca). Thanks are also extended to Oliver Calderon and Misha Pidburtnyi for helpful discussions. References Cao, Z., Wei, B., Miao, J., Wang, Z., Lü, Z., Li, W., Zhang, Y., Huang, X., Zhu, X., Feng, Q. and Sui, Y., (2016). Efficient electrolysis in symmetrical solid oxide electrolysis cell with highly active 3Sr0.7Fe0.7Ti0.3O3 electrode material. Electrochemistry Communications, 69, 80-83. Zhang, Y. Q., Li, J. H., Sun, Y. F., Hua, B., & Luo, J. L. (2016). Highly active and redox-stable Ce-doped LaSrCrFeO-based cathode catalyst for CO2 SOECs. ACS Applied Materials & Interfaces,, 8(10), 6457-6463. Addo, P. K., Molero‐Sanchez, B., Chen, M., Paulson, S., & Birss, V. (2015). CO/CO 2 study of high performance La0. 3Sr0. 7Fe0. 7Cr0. 3O3–δ reversible SOFC electrodes. Fuel Cells, 15(5), 689-696. Molero-Sánchez, B., Morán, E., & Birss, V. (2017). Rapid and Low-Energy Fabrication of Symmetrical Solid Oxide Cells by Microwave Methods. ACS Omega, 2(7), 3716-3723. Ansari, H. M., Bass, A. S., Ahmad, N., & Birss, V. I. (2022). Unraveling the evolution of exsolved Fe–Ni alloy nanoparticles in Ni-doped La 0.3 Ca 0.7 Fe 0.7 Cr 0.3 O 3− δ and their role in enhancing CO 2–CO electrocatalysis. Journal of Materials Chemistry A. Kozokaro, V. F., Addo, P. K., Ansari, H. M., Birss, V. I., & Toroker, M. C. (2020). Optimal Oxygen Vacancy Concentration for CO 2 Reduction in -Abstract Truncated-

Harnessing the electrocatalytic potential of in-situ exsolution of Ni nanoparticles on lanthanum and calcium co-doped strontium titanate for CO 2 reduction in solid oxide electrolysis cells

Enhancing Electrochemical Efficiency of Solid Oxide Electrolysis Cells for Carbon Dioxide Reduction Through Nickel‐Doped Titanate‐Based Cathode with Doped Ceria Electrolyte

Tuning exsolution of nanoparticles in defect engineered layered perovskite oxides for efficient CO 2 electrolysis

Collective Synergistic Catalysis of Electrochemical CO2 Reduction on Nonstoichiometric Double Perovskites

New Insight into the Doped Strontium Titanate Cathode with In Situ Exsolved Nickel Nanoparticles for Electrolysis of Carbon Dioxide

In situ exsolved Fe nanoparticles enhance the catalytic performance of perovskite cathode materials in solid oxide electrolytic cells

In-situ exsolved Ni-Cu alloy nanoparticles for optimization of perovskite electrodes in solid oxide electrolysis cell

Ni–Doped Pr0.7Ba0.3MnO3−δ Cathodes for Enhancing Electrolysis of CO2 in Solid Oxide Electrolytic Cells

La0.6Sr0.4Fe0.8Ni0.2O3-δ perovskite with in-situ exsolved Ni-Fe nanoparticles as high activity catalyst for symmetric solid oxide electrolysis cells

Perovskite Chromite With In-Situ Assembled Ni-Co Nano-Alloys: A Potential Bifunctional Electrode Catalyst for Solid Oxide Cells

Altering B-site surroundings with low-valence Cu to regulate La1.2Sr0.8NiO4+δ electrocatalysis for protonic ceramic fuel cells

High catalytic activity of Fe-based perovskite fuel electrode for direct CO2 electroreduction in SOECs

In Situ Construction of Metal/Perovskite Interfaces with Exsolved FeNi Alloy Nanoparticles for High-Temperature CO2 Electrolysis

Robust Ni-doped Ruddlesden-popper (La,Sr)Fe1-xNixO4+δ oxide as solid oxide cells fuel electrode for CO2 electrolysis

Enhancing catalytic activity of CO 2 electrolysis via B-site cation doped perovskite cathode in solid oxide electrolysis cell

In Situ Exsolution of Core‐Shell Structured NiFe/FeOx Nanoparticles on Pr0.4Sr1.6(NiFe)1.5Mo0.5O6‐δ for CO2 Electrolysis

Engineering dual-exsolution on self-assembled cathode to achieve efficient electrocatalytic CO 2 reduction

Achieving Highly Efficient Carbon Dioxide Electrolysis by In Situ Construction of the Heterostructure

Enhanced activities of CO2 electrolysis in solid oxide electrolysis cells via in-situ tailoring of La0.75Sr0.25Cr0.5Mn0.4Fe0.1O3-δ/Fe2P heterointerfaces

CO2-induced In-Situ Surface Reconfiguration of Strontium Cobaltite-Based Perovskite for Accelerated Oxygen Reduction Reaction

Reactive Molecular Dynamics Study for CO2 Electrocatalytic Conversion on Lmfcr (M= Sr, Ca) Perovskite-Based Solid Oxides