Abstract:AbstractYM2 Oilfield is an ultra-deep carbonate oilfield located in the northern uplift of Tarim Basin in western China. We have identified 108 seismically resolvable faults formed over three periods. These faults control the distribution of oil and gas accumulation units. Permeability differs significantly amongst various faults, and various sections of the fault planes. There has been no effective quantitative evaluation measure on the relative opening or sealing of faults for a long time, the sealing capacity of the faults have not been evaluated so far. This has a negative impact on the evaluation of accurate reservoir compartmentalization and partitioning, and evaluation of various oil and gas flow units which are critical for constraining the development program and production performance of oil field.There are many geological factors that influence the permeability of faults, such as burial depth, fault throw, dip angle, strike, lithology variation, pore pressure and the in-situ stress field. After evaluating these factors in the YM2 oilfield, we determined that the critical factor that controls fault permeability is the geomechanical response of faults under the current stress field. In order to determine if the faults are permeable relatively in the current stress state, we established the geomechanical model of YM2 reservoir which describes the present-day stress regime, along with the vertical and horizontal distribution of the geomechanical parameters of this reservoir. Based on the interpretation of 3D seismic data, we characterized the spatial combination relations of faults in the reservoir and extracted the occurrence information of each fault according to certain step size. Then, we calculated the normal and shear stress acting on the various fault planes in order to evaluate whether those faults are permeable relatively in the current stress state.It is shown that the fault zone not only controls the evolution of local structure, but also significantly impacts the regional stress field, which in turn impacts the geomechanical response of fault zone and their permeability. The NW strike-slip faults in the southeastern part of the oilfield in particular are characterized by high values of normal stress and low shear-to-normal stress ratios with relative lower permeability. Producing wells in this region have low productivity and weak connectivity amongst wells. In contrast, the northwestern area that has NE strike-slip faults and NS thrust faults have low stress but high shear to normal stress ratios, and hence relatively higher permeability. The surrounding wells have higher inter-well connectivity and are more productive. In the same fault zone, as the relationship between stress and fault orientation changes, the potential mechanical behavior also affects permeability variation and well productivity. The main reason is that the interaction between faults and stress field leads to the increased reservoir heterogeneity in the fault zone or among faults. Based on this concept, we chose several advantageous well locations, where horizontal minimum principal stress is low, anisotropy of horizontal stress and shear-to-normal stress ratio are high.This study classified the faults of YM2 oilfield based on geomechanical response, clarified permeability variation of various fault zones and their impact on productivity, and then it provided the quantitative selection basis for well placement and wellbore trajectory optimization.

Comprehensive evaluation of geology and engineering integration of XTT tight oil reservoir

Geological and Engineering 'sweet Spots' in the Permian Lucaogou Formation,Jimusar Sag,Junggar Basin

Geological Characteristics and “sweet Area” Evaluation for Tight Oil

Prediction of Longitudinal Superimposed "Sweet Spot" of Tight Gas Reservoir: A Case Study of Block G, Canada

Effective reservoir identification and sweet spot prediction in Chang 8 Member tight oil reservoirs in Huanjiang area, Ordos Basin

Quantitative classification evaluation model for tight sandstone reservoirs based on machine learning

“Double sweet spot” identification method via cluster analysis of petrophysical properties from well logg data: A case study of a tight sandstone reservoir

Study on the rock physical mechanical properties evaluation of tight oil reservoir in Chang 7 member, Longdong area, Ordos Basin, China

An Unsupervised Machine Learning Based Double Sweet Spots Classification and Evaluation Method for Tight Reservoirs

A study on the evaluation of geological sweet spots in the super deep strike slip fault controlled reservoir

Quantitative evaluation methods of tight reservoirs based on multi-feature fusion: A case study of the fourth member of Shahejie Formation in Liaohe Depression

Evaluation and application of porous structure characterization technologies in unconventional tight reservoirs

Investigation of Geomechanical Response of Fault in Carbonate Reservoir and Its Application to Well Placement Optimization in YM2 Oilfield in Tarim Basin

The hydraulic fracturing design technology and application of geological-engineering integration for tight gas in jinqiu gas field

Data-driven multiscale geomechanical modeling of unconventional shale gas reservoirs: a case study of Duvernay Formation, Alberta, West Canadian Basin

Pore Structure and Connectivity of Tight Sandstone Reservoirs in Petroleum Basins: A Review and Application of New Methodologies to the Late Triassic Ordos Basin, China

A Reservoir Quality Evaluation Approach for Tight Sandstone Reservoirs Based on the Gray Correlation Algorithm: A Case Study of the Chang 6 Layer in the W Area of the As Oilfield, Ordos Basin

Geological and Engineering Integration Fracturing Design and Optimization Study of Liushagang Formation in Weixinan Sag

Quantitative Prediction of Seismic Rock Physics of Hybrid Tight Oil Reservoirs of the Permian Lucaogou Formation, Junggar Basin, Northwest China

True triaxial physics simulations and process tests of hydraulic fracturing in the Da'anzhai section of the Sichuan Basin tight oil reservoir

A novel method of quantitative evaluation and comprehensive classification of low permeability-tight oil reservoirs: A case study of Jidong Oilfield, China