Abstract:With the increased frequency of accidental and deliberate explosions, evaluating the response of civil infrastructure systems to blast loading has been attracting the interests of the research and regulatory communities. However, with the high cost and complex safety and logistical issues associated with field explosives testing, North American blast-resistant construction standards (e.g. ASCE 59-11 and CSA S850-12) recommend the use of shock tubes to simulate blast loads and evaluate relevant structural response. This study first aims at developing a simplified two-dimensional axisymmetric shock tube model, implemented in ANSYS Fluent, a computational fluid dynamics software, and then validating the model using the classical Sod’s shock tube problem solution, as well as available shock tube experimental test results. Subsequently, the developed model is compared to a more complex three-dimensional model and the results show that there is negligible difference between the two models for axisymmetric shock tube performance simulation; however, the three-dimensional model is necessary to simulate non-axisymmetric shock tubes. Following the model validation, extensive analyses are performed to evaluate the influences of shock tube design parameters (e.g. the driver section pressure and length and the expansion section length) on blast wave characteristics to facilitate a shock tube design that would generate shock waves similar to those experienced by civil infrastructure components under blast loads. The results show that the peak reflected pressure increases as the driver pressure increases, while a decrease in the expansion length increases the peak reflected pressure. In addition, the positive phase duration increases as both the driver length and expansion length are increased. Finally, the developed two-dimensional axisymmetric model is used to optimize the dimensions of a physical large-scale conical shock tube system constructed for civil infrastructure component blast response evaluation applications. The capabilities of such shock tube system are further investigated by correlating its design parameters to a range of explosion threats identified by different hemispherical TNT charge weight and distance scenarios.

Energy exchange mechanism between blast wave and expansion tube

Explosion power evaluation based on the energy absorption characteristics of expansion tube structure

Research of Loading Effects of Blast in Air

Probability Distribution and Determination of Blast Loading During Structural Blast Resistant Study

Energy Absorption Performance of a New Circular–triangular Nested Tube and Its Application As Sacrificial Cladding

Development of a high-performance blast energy-absorbing system for building structures

Response of Energy Absorbing Connector with Polyurethane Foam and Multiple Pleated Plates under Impact Loading

Dynamic Response and Blast-Resistance Analysis of a Tunnel Subjected to Blast Loading

Enhancing blast mitigation in tunnels with expansion chamber subjected to high explosives detonations for protecting underground facilities

Blast load simulation using conical shock tube systems

Evaluating the blast mitigation performance of hard/soft composite structures through field explosion experiment and numerical analysis

Mitigation effects on the reflected overpressure of blast shock with water surrounding an explosive in a confined space

Experimental and numerical study on external explosions of cylindrical versus spherical charges at tunnel entrance

Evaluation of blast mitigation performance of cylindrical explosion containment vessels based on water containers

Behaviour of expansion tubes under impact load: Deformation mode and mechanical response

Energy absorption behavior of composite tube structures

Numerical study of dynamic response and failure analysis of spherical storage tanks under external blast loading

Research on diffraction flow effect of explosion shock wave behind blast wall

Testing and evaluation of the thermal damage caused by an explosion of energetic materials

Experimental and theoretical study on an innovative energy absorption structure comprised of composite materials with necked‐down section subject to axial compressive load

A New Analytical Prediction for Energy Responses of Hemi-Cylindrical Shells to Explosive Blast Load