Abstract:This work reports one interesting optical microcavity: self-rolled up optical microcavity with tubular geometry. Several different fabrication processes for the microtubular optical cavities had been reported [1]. Different from transitional fiber-drawing technique [2], the nanomembrane with pre-defined geometries can be bend into a curved structure and forms a three dimensional (3D) tubular structure by predefined strain-engineering via lift-off technology [3, 4]. Our group focus on the research on the optical properties of these self-rolled up optical microcavities [5, 6]. A schematic view of the self-rolled up processes is illustrated in Figure 1 [1]. The nanomembranes released via the lift-off processes from the sacrificial layer on substrate. Then, the freestanding nanomembranes self-rolled up into microtubes and performed as optical microcavities. The typical micro-photoluminescence (μ-PL) spectra of these rolled-up microtubes in various color regions are shown in Figure 2 [5]. Various interesting materials (Figure 2) were used for the fabrication of self-rolled up tubular optical microcavities in difference spectral range [5]. As shown in Figure 3, the μ-PL spectra measured at different positions along the micro-tubes by rolling circular nanomembranes indicates an evident 3D optical confinement. The WGMs shift to lower wavelengths when moving from the middle to the end of the micro-tubular cavity along the z direction. We consider that this interesting phenomenon in WGMs (both emergence of sub-peaks and the shift of modes) should be intimately connected with the geometrical structure of the micro-tubular cavity. Effective surface modification and geometry design will introduce special optical properties in these self-rolled up microcavities [6]. The rolling process has been provides a convenient way to produce a stack of multilayers made from different materials with tunable geometry, demonstrating a new method to prepare optical microdevices. The future of rolled-up microcavities lies in many aspects from fundamental science to practical applications. The corresponding resonance can thus be tuned in terms of wavelength range and Q-factor. Functional materials may also be incorporated to achieve effective coupling between the light and other physical fields, giving birth to special micro devices with good tunability. Meanwhile, rolled-up thin-walled oxide tubular microcavity delivers a new optical component for light coupling and may imply interesting applications in the interaction between light and matter [6]. Considering the on-chip integratability of rolled-up structures, researchers may also be able to produce a sensing device to realize lab-in-a-tube [3].

Rolled‐Up Membranes from GaAs/AlOx Core‐Shell Nanowire Ensembles Through Natural Oxidation

Fabrication of ZnO/Al2O3 core–shell nanostructures and crystalline Al2O3 nanotube

Oxidation Resistant Germanium Nanowires: Bulk Synthesis, Long Chain Alkanethiol Functionalization and Langmuir-Blodgett Assembly

ZnO Nanowire and $\hbox{ws}_{2}$ Nanotube Electronics

Experimental realization of coexisting states of rolled-up and wrinkled nanomembranes by strain and etching control

Shaped nanomembranes: From fundamental perception to new concepts and applications

Optical Device Based on a Nanopillar Array by the Pattern Transfer of an Anodic Aluminum Oxide Membrane

Fabrication, Self-Assembly, and Properties of Ultrathin Aln/Gan Porous Crystalline Nanomembranes: Tubes, Spirals, and Curved Sheets

Fabrication of Lateral Electrodes on Semiconductor Nanowires Through Structurally Matched Insulation for Functional Optoelectronics.

Stimuli-responsive and On-Chip Nanomembrane Micro-Rolls for Enhanced Macroscopic Visual Hydrogen Detection

Rolled‐up Nanotechnology: Materials Issue and Geometry Capability

Uniaxial and Tensile Strained Germanium Nanomembranes in Rolled-Up Geometry by Polarized Raman Scattering Spectroscopy

Measurement of residual elastic strain in rolled-up amorphous nanomembranes using nanobeam electron diffraction

Individual Alumina Nanotubes Coaxially Wrapping Carbon Nanotubes and Nanowires

Tubular/helical Architecture Construction Based on Rolled-Up AlN Nanomembranes and Resonance As Optical Microcavity

SELF-ROLLED UP TUBULAR OPTICAL MICROCAVITIES

Bending and reverse bending during the fabrication of novel GaAs/(In,Ga)As/GaAs core-shell nanowires monitored by in situ X-ray diffraction

Synthesis and Optical Properties of Silver Nanowire Arrays Embedded in Anodic Alumina Membrane

Alumina Nanowire Arrays Standing on a Porous Anodic Alumina Membrane

Amorphous alumina oxide coating to improve dimensional stability and efficiency of silicon energy storage anodes: Molecular dynamics simulation

Mechanically Stable and Damage Resistant Freestanding Ultrathin Silver Nanowire Films with Closely Packed Crossed-Lamellar Structure