Abstract:Purpose The purpose of this paper is to analyse the thermal environment of two engineering testing centres cooled via different means using computational fluid dynamics (CFD), focussing on the indoor temperature and air movement. This computational technique has been used in the analysis of thermal environment in buildings where the profiles of thermal comfort parameters, such as air temperature and velocity, are studied. Design/methodology/approach A pilot survey was conducted at two engineering testing centres – a passively cooled workshop and an air-conditioned laboratory. Electronic sensors were used in addition to building design documentation to collect the required information for the CFD model–based prediction of air temperature and velocity distribution patterns for the laboratory and workshop. In the models, both laboratory and workshop were presumed to be fully occupied. The predictions were then compared to empirical data that were obtained from field measurements. Operative temperature and predicted mean vote (PMV)–predicted percentage dissatisfied (PPD) indices were calculated in each case in order to predict thermal comfort levels. Findings The simulated results indicated that the mean air temperatures of 21.5°C and 32.4°C in the laboratory and workshop, respectively, were in excess of the recommended thermal comfort ranges specified in MS1525, a local energy efficiency guideline for non-residential buildings. However, air velocities above 0.3 m/s were predicted in the two testing facilities, which would be acceptable to most occupants. Based on the calculated PMV derived from the CFD predictions, the thermal sensation of users of the air-conditioned laboratory was predicted as −1.7 where a “slightly cool” thermal experience would prevail, but machinery operators in the workshop would find their thermal environment too warm with an overall sensation score of 2.4. A comparison of the simulated and empirical results showed that the air temperatures were in good agreement with a percentage of difference below 2%. However, the level of correlation was not replicated for the air velocity results, owing to uncertainties in the selected boundary conditions, which was due to limitations in the measuring instrumentation used. Research limitations/implications Due to the varying designs, the simulated results of this study are only applicable to laboratory and workshop facilities located in the tropics. Practical implications The results of this study will enable building services and air-conditioning engineers, especially those who are in charge of the air-conditioning and mechanical ventilation (ACMV) system design and maintenance to have a better understanding of the thermal environment and comfort conditions in the testing facilities, leading to a more effective technical and managerial planning for an optimised thermal comfort management. The method of this work can be extended to the development of CFD models for other testing facilities in educational institutions. Social implications The findings of this work are particularly useful for both industry and academia as the indoor environment of real engineering testing facilities were simulated and analysed. Students and staff in the higher educational institutions would benefit from the improved thermal comfort conditions in these facilities. Originality/value For the time being, CFD studies have been carried out to evaluate thermal comfort conditions in various building spaces. However, the information of thermal comfort in the engineering testing centres, of particular those in the hot–humid region are scantily available. The outcomes of this simulation work showed the usefulness of CFD in assisting the management of such facilities not only in the design of efficient ACMV systems but also in enhancing indoor thermal comfort.

The significance of indoor thermal comfort on occupants' perception: in university buildings in Auckland, New Zealand

Thermal comfort and indoor air quality in higher education: A case study in Houston, TX, during mid-season

Advancement on Thermal Comfort in Educational Buildings: Current Issues and Way Forward

Thermal Comfort in a Tropical Climate: Case Study of the Cafeteria in Student Residential College, UTHM Pagoh Branch Campus

The Impact of Space Design on Occupants' Satisfaction with Indoor Environment in University Dormitories

Analysis of the Interplay between Indoor Air Quality and Thermal Comfort in University Classrooms for Enhanced HVAC Control

Introducing the comfort performance gap in new educational buildings: a case study

MEASUREMENT AND FIELD SURVEY OF THERMAL ENVIRONMENT IN CENTRAL HEATING ROOMS

An Investigation Of Thermal Comfort And Adaptive Behaviors In Naturally Ventilated Residential Buildings In Tropical Climates: A Pilot Study

Building Matters: Spatial Variability in Machine Learning Based Thermal Comfort Prediction in Winters

Assessment of Occupant Adaptive Heating Behaviour in Office Buildings - A Pilot Field Study

Indoor Environmental Quality Assessment and Occupant Satisfaction: A Post-Occupancy Evaluation of a UAE University Office Building

Thermal comfort prediction of air-conditioned and passively cooled engineering testing centres in a higher educational institution using CFD

Association of Perceived Thermal Comfort and Air Quality with Building- and Occupant-Related Characteristics and Environmental Parameters in Sweden

A Review of Thermal Comfort in Residential Buildings: Comfort Threads and Energy Saving Potential

Thermal comfort evaluation in architectural studio classrooms – A summer study in a warm to moderate Indian climate

Long-time investigation on indoor thermal comfort in campus buildings in Beijing

Predicting students' thermal sensation votes in university libraries taking into account their mood states

Interaction between Thermal Comfort, Indoor Air Quality and Ventilation Energy Consumption of Educational Buildings: A Comprehensive Review

Regular and temporary occupants' perceptions of satisfaction in tertiary education buildings

Thermal comfort analysis and improvement of outdoor sports spaces in universities: a case study of Xi’an Jiaotong University