Abstract:Purpose: Compliant mechanisms are commonly used in the design of manipulator and surgical robotic tools for minimally invasive surgery (MIS) thanks to their compactness, ability of miniaturization and lower part count. However, conventional compliant joint has higher internal stiffness, which limits the bending radius. To overcome this problem, a novel tendon-driven manipulator structure based on monolithic compliant rolling-contact joint (CRCJ) is proposed. Methods: The proposed rolling-contact mechanism is used to prevent cable slack during actuation, which occurs in conventional compliant joint design. By means of selective laser sintering (SLS) technique, the CRCJ can be fabricated in a monolithic structure, thus granting the CRCJ both the advantages of compliant joints and rolling-contact mechanism. Simulations with nonlinear finite element analysis (FEA) and experiments were conducted to evaluate and compare the mechanical properties of the proposed CRCJ with conventional leaf-type compliant joint including the bending and compliant motion. Results: Experimental results showed that the CRCJ has lower bending stiffness, higher maximum bending angle (over [Formula: see text]) and a higher compliance compared to conventional compliant hinges, which allows a larger workspace and reduces the possibility of tissue injury. Agreement was also found between the nonlinear FEA and experiments regarding the relation between actuation force and bending angle. A primary prototype of a 3-DOF handheld laparoscopic manipulator with a diameter of 7 mm was further developed. Conclusion: A dexterous tendon-driven monolithic manipulator structure based on CRCJ for MIS is proposed. A preliminary prototype of a handheld laparoscopic manipulator demonstrates the capability of the CRCJ for steerable medical devices. However, design improvements based on FEA and application-orientated prototypes considering anatomical requirements still show room for improvements.

Novel manipulator RCM (remote center of motion) mechanism of minimally invasive surgery robot

Kinematic Design of a 2DoFs Remote Center of Motion Mechanism for Minimally Invasive Surgical Robot

A new circular-guided remote center of motion mechanism for assistive surgical robots

Design and Kinematic Optimization of a Two Degrees-of-Freedom Planar Remote Center of Motion Mechanism for Minimally Invasive Surgery Manipulators

Design of a 1R1T planar mechanism with remote center of motion

Design and Validation of A Novel Planar 2R1T Remote Center-of-motion Mechanism Composing of Dual-Triangular and Straight-Line Linkages

Manipulability Optimization Control of a Serial Redundant Robot for Robot-assisted Minimally Invasive Surgery

Design of a novel tendon-driven manipulator structure based on monolithic compliant rolling-contact joint for minimally invasive surgery

Kinematic Optimization of a Continuum Surgical Manipulator

A Novel Master Manipulator with Force Feedback for Robot-Assisted Natural Orifice Transluminal Endoscopic Surgery

Robotic Visible Forceps Manipulator with a Novel Linkage Bending Mechanism

Surgical assistant manipulator with diagonal joints and multi-stage telescopic screws for laparoscopic solo surgery

Surgical Assistant Manipulator with Rack Gear and Gear Train Mechanism for Laparoscopic Surgery *

A Novel Flexure-Based 3-DOF Micro-Parallel Manipulator with a Gripper for Micro/nano Manipulation

Mechanism Design of the Minimally Invasive Vascular Interventional Surgery Robot System.

A Novel Miniature Spring-Based Continuum Manipulator for Minimally Invasive Surgery: Design and Evaluation

Precise and High-Load Capacity Miniature 6-DOF Manipulator for Microsurgery

Development of a Base-Actuated Three-Rhombus Configured Remote Center Of Motion Mechanism for Lumbar Puncture

Optimal Design of a Novel Spherical Scissor Linkage Remote Center of Motion Mechanism for Medical Robotics

Design and Analysis of Positioning Manipulator Structure for Vascular Interventional Surgery Robot System

A Surgeon’s Habits-based Novel Master Manipulator for the Vascular Interventional Surgical Master-Slave Robotic System