Abstract:Since the period required for testing the atmospheric corrosion of steel is long, most studies have focused on the corrosion behavior in less than three years, making exploring long-term atmospheric corrosion particularly valuable. This study investigates the corrosion behaviors, corrosion models, and mechanical properties of Q235 welded steel pipes collapsing due to corrosion after 25-year service in an urban industrial atmospheric environment using SEM, XRD, electrochemical methods, 3-D noncontact surface profilometry, and static tensile testing. The typical morphologies of & alpha;-FeOOH, & gamma;-FeOOH, and Fe3O4 and the effect of the content of various corrosive materials on the corrosion rate of the steel pipes are identified and analyzed. Then, the influence of different corrosion degrees on the mechanical properties of the steel pipes is examined by considering the morphologies of the rust pits. The results show that the wetting-drying cycles affect the structures of the rust layers and their protective properties. The rust layers on the sheltered surface are thicker but less protective than those on the exposed surface. In the wet state, FeSO4 accelerates ion transfer, while Fe3O4 facilitates electron transfer. These processes collectively contribute to the corrosion of Q235 steel. Moreover, as the time-of-wetness of the rust layers on sheltered specimens increases, the corrosion rate of Q235 steel also accelerates. The corrosion model combines pitting and uniform corrosion and gradually changes from predominated by pitting to thickness as the corrosion degree increases. The corrosion morphology impacts the mechanical properties of the welded steel pipes, and the influences of the thickness loss and maximum rust pit depth on these properties are profound.

Deterioration of marine offshore structures and subsea installations subjected to severely corrosive environment: A review

Effect Of Corroded Surface Morphology On Ultra-Low Cycle Fatigue Of Steel Bridge Piers

Corrosion Behaviors and Mechanical Properties of Q235 Steel Pipes Collapsing Due to Corrosion after 25-Year Service in Urban Industrial Atmospheric Environment

STATE OF ART OF RESEARCH ON DURABILITY OF COASTAL AND OFFSHORE REINFORCED CONCRETE BRIDGES

Corrosion in marine and offshore steel structures: Classification and overview

Failure analysis during the operation of offshore oil and gas structures

Corrosion form transition of mooring chain steel in simulated deep-sea environments: remarkable roles of dissolved oxygen and hydrostatic pressure

Corrosion Protection Systems and Fatigue Corrosion in Offshore Wind Structures: Current Status and Future Perspectives

Model for Wastage Allowance and Strength Properties of Pipe Piles Exposed to Marine Corrosion

Influence of Erosion Damage on the Spatiotemporal Deterioration of Marine RC Structures

Investigating Corrosive Environmental Factors and Corrosion Rate to Assess Vulnerable Corrosive Areas of Offshore Bridges

Review of corrosion monitoring and prognostics in offshore wind turbine structures: Current status and feasible approaches

Deterioration of Mechanical Properties and the Damage Constitutive Model of Corroded Steel in an Industrial Environment

A time-dependent corrosion wastage model for the partial structure of mobile offshore platforms

Probabilistic fatigue life assessment of bridge welded joints considering steel corrosion

Predicting corrosion for life estimation of ocean and coastal steel infrastructure

Corrosion behavior research and corrosion prediction of structural steel in marine engineering

Data-driven Corrosion Failure Probabilistic Assessment Model for Reinforced Concrete Structures

Influence of Stochastic Chlorine Environment on the Spatiotemporal Deterioration of Marine RC Structures

Effect of Corrosion-Induced Structural Degradation on the Ultimate Strength of a High-Tensile-Steel Ship Hull

Efficient numerical algorithms for assessing the mechanical performance of corroded offshore steel sheet piles