Abstract:The design of electrocatalysts capable of selectively reducing nitrate to ammonia is gaining interest as a means of transforming waste into fertilizers. However, most prior investigations of prototypical electrocatalysts, such as polycrystalline Pd and Pt, have focused on unraveling the mechanisms responsible for the selective reduction of nitrate to nitrogen gas. Such polycrystalline noble metals demonstrate notoriously low activity for nitrate reduction (nitrate to nitrite) and high activity for nitrite reduction (nitrite to nitrogen). Here, we aim to elucidate the effect Pd surface structure has on nitrate and nitrite reduction and to determine what role catalyst structural design can play in enabling selective reduction of nitrate to ammonia. Through synthesizing nanocatalysts with controlled facets (e.g., nanocubes, cuboctahedrons, octahedrons, and concave nanocubes), we demonstrate that Pd(111) > Pd(100) > Pd(hk0) for nitrate reduction activity and Pd(100) > Pd(hk0) > Pd(111) for nitrite reduction activity in an alkaline electrolyte. Octahedrons without Pd (100) facets exhibited nearly selective production of NO2– with little to no measurable NH3 or N2. However, nanocubes that expose only the Pd(100) facet exhibited high activity for NO2– reduction to NH3. Cuboctahedrons that expose both Pd(111) and Pd(100) facets demonstrated the highest production of ammonia (306.8 μg h–1 mgPd–1) with a faradaic efficiency of 35%. Density functional theory (DFT) simulations reveal that *NO3 dissociation to *NO2 + O* is more favorable on Pd(111) than Pd(100), explaining the faster nitrate reduction kinetics on the Pd(111) facet observed in the experiments. The simulations also show that *NO2 binds less strongly to Pd(111) compared to Pd(100). Thus, nitrite formed via nitrate dissociation readily desorbs from the Pd(111) surface, which explains why Pd(111) selectively reduces nitrate to nitrite. The results show that cuboctahedron is bifunctional in nature, with the (111) facet catalyzing the conversion of NO3– to NO2– and the (100) facet catalyzing the conversion of NO2– to NH3.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.1c01413?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.1c01413</a>.TEM images at low magnification of all shape-controlled Pd catalysts; TEM images for Pd deposition on carbon support; ECSA calculation methods and summarizes; UV–vis measurements; The absorbance–concentration calibration curves of NO3–-N, NO2–-N, and NH3-N; in situ mass spectrometer results; TEM results for stability after testing; nitrate and nitrite reduction activity of Vulcan carbon XC72R; additional H-cell test with carbon paper electrode and OCV tests of all Pd catalysts for verifying contaminations; Total nitrogen balance before and after electrolysis; size effects on NH3 yield of Pd with larger sizes by annealing; and additional computational details and results (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.1c01413/suppl_file/cs1c01413_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Pore-Size-Tuned Pd Films Grown on Ni Foam as an Advanced Catalyst for Electrosynthesis of Ammonia

Ternary AuPS Alloy Mesoporous Film for Efficient Electroreduction of Nitrogen to Ammonia

A Graphene Oxide‐supported PdCu Catalyst for Enhanced Electrochemical Synthesis of Ammonia

Palladium Nanothorn Assembly Array for Efficient Electroreduction of Nitrogen to Ammonia

Interstitial Boron-Doped Nanoporous Palladium Film for Electro-Reduction of Nitrogen to Ammonia

Effects of AuCuB Catalysts with Porous Nanostructures on Electrosynthesis of Ammonia

Engineering Porosity into Trimetallic PtPdNi Nanospheres for Enhanced Electrocatalytic Oxygen Reduction Activity

Enhanced Electrocatalytic Performance of TiO2 Nanoparticles by Pd Doping Toward Ammonia Synthesis under Ambient Conditions

Modulating Single‐Atom Palladium Sites with Copper for Enhanced Ambient Ammonia Electrosynthesis

Self‐Supported Pd Nanorod Arrays for High‐Efficient Nitrate Electroreduction to Ammonia

Facile Synthesis of Carbon Nanobelts Decorated with Cu and Pd for Nitrate Electroreduction to Ammonia

Enhanced electrocatalytic performance of TiO 2 nanoparticles by Pd doping toward ammonia synthesis under ambient conditions

Structure Sensitivity of Pd Facets for Enhanced Electrochemical Nitrate Reduction to Ammonia

Regulating nitrogenous adsorption and desorption on Pd clusters by the acetylene linkages of hydrogen substituted graphdiyne for efficient electrocatalytic ammonia synthesis

Boosting the Electroactivity of Porous Ni 2 P/Pd 6 P Nanorods for Nitrate to Ammonia Through Hydrogen Spillover Effect

Ambient Ammonia Electrosynthesis from Nitrogen and Water by Incorporating Palladium in Bimetallic Gold–Silver Nanocages

Enhanced localized electron density from PdCu nanoparticles loading on defective TiO2 support for selective nitrate electroreduction to ammonia

Mesoporous PdN Alloy Nanocubes for Efficient Electrochemical Nitrate Reduction to Ammonia

Electroreduction of Nitrate to Ammonia on Palladium–Cobalt–Oxygen Nanowire Arrays

Periodic Adjacent Pd‐Fe Pair Sites for Enhanced Nitrate Electroreduction to Ammonia via Accelerating Proton Relay