Abstract:Recent advances in high-resolution three-dimensional X-ray CT imaging have made it possible to visualize fluid configurations during multiphase displacement at the pore-scale. However, there is an inherited difficulty in image-based curvature measurements: the use of voxelized image data may introduce significant error, which has not-to date-been quantified. To find the best method to compute curvature from micro-CT images and quantify the likely error, we performed drainage and imbibition direct numerical simulations for an oil/water system on a bead pack and a Bentheimer sandstone. From the simulations, local fluid configurations and fluid pressures were obtained. We then investigated methods to compute curvature on the oil/water interface. The interface was defined in two ways; in one case the simulated interface with a sub-resolution smoothness was used, while the other was a smoothed interface extracted from synthetic segmented data based on the simulated phase distribution. The curvature computed on these surfaces was compared with that obtained from the simulated capillary pressure, which does not depend on the explicit consideration of the shape of the interface. As distinguished from previous studies which compared an average or peak curvature with the value derived from the measured macroscopic capillary pressure, our approach can also be used to study the pore-by-pore variation. This paper suggests the best method to compute curvature on images with a quantification of likely errors: local capillary pressures for each pore can be estimated to within 30% if the average radius of curvature is more than 6 times the image resolution, while the average capillary pressure can also be estimated to within 11% if the average radius of curvature is more than 10 times the image resolution.

Study on the Measurement of Micro-curvature Radii Based on Image Processing

Survey of measurement methods for surface roughness

Development of an Instrument for Measuring Curvature of a Lens

A Stitching Linear-Scan Method for Roundness Measurement of Small Cylinders

A Study on 3D Micro-Topographical Measurement of FRCMC Grinding Surface

An Edge Reversal Method for Precision Measurement of Cutting Edge Radius of Single Point Diamond Tools

Non-equidistant Scanning Path Generation for the Evaluation of Surface Curvature in Metrological Scanning Probe Microscopes

Nanometrology of an Ultraprecision Machined Surface by Using Optical Sensors

Research on the non-contact measurement of unknown freeform surface and determining its key geometric characteristics

Experimental Study on the Measurement of the Curvature Radius of A Spherical Grid

Evaluation on Ground Surface Accuracies of Large-Depth and Steeply Micro-Structured SiC Surfaces

On-machine Measurement of a Slow Slide Servo Diamond-Machined 3D Microstructure with a Curved Substrate

Profile Measurements of Micro-Aspheric Surfaces Using an Air-Bearing Stylus with A Microprobe

Quantification of Uncertainty and Best Practice in Computing Interfacial Curvature from Complex Pore Space Images.

Local Geometric Measurement for 3-D Curved Micro-Pipe

Three-dimensional metrology of microturning tool edge radii

Self-evaluation of the Cutting Edge Contour of a Microdiamond Tool with a Force Sensor Integrated Fast Tool Servo on an Ultra-Precision Lathe

High-accuracy Roundness Measurement of Small Cylindrical Workpieces by a High-Frequency Filtering Method

Measurement on a parabolic surface by quantitative shadow method in computer-controlled optical surfacing

Modeling and Analysis of Uncertainty in On-Machine Form Characterization of Diamond-Machined Optical Micro-Structured Surfaces

A New Centering Method of the Measuring Probe for Spiral Scanning-Based Surface Profile Measurement Systems