Abstract:Neat well cement experience significant strength retrogression at high temperatures above 110 °C, especially at approximately 150 °C. To reveal the mechanism of performance degradation and guide the preparation of high-performance cement, we investigate the hydration process, mechanical behavior, and fracture process for well cement at the temperature of 150 °C based on molecular dynamics simulations and experiments. From triaxial pressure tests and Brazilian splitting tests, the strength, elastic modulus, and Poisson's ratio of well cement decrease drastically with temperature increases from 80 °C to 150 °C. According to XRD, TG/DTG/DSC, and SEM, the hydration degree is insufficient, and larger pores exist in the microstructures. As the main binding phase of well cement, the mechanism of calcium silicate hydrates (C-S-H) influenced by curing temperatures is investigated through molecular dynamics simulations. C-S-H with calcium/silicon ratios (C/S) of 1.1 and 1.8 are simulated in the aqueous and solid states to investigate precipitation and mechanical behaviors. By reducing the C/S ratio to 1.1, the strength rebounds to a certain extent, and the adequacy of the hydration degree improved. It is found from the polymerization process that the increasing temperature promotes the polymerization rate, which is higher with C/S = 1.8 than that of 1.1. However, an increase in the C/S ratio will lead to a decrease in bridging oxygen content, thus a lower polymerization degree. The fracture simulations of C-S-H gels at different temperatures indicate that the failure of the C-S-H structure is mainly attributed to the disassembling of the calcium oxygen layers. With a higher temperature, there are fewer Ca-O bonds breaking, thus less strain energy consumed, resulting in worse performance. The elasticity of C-S-H, including Young's and shear moduli, also exhibits certain degradations at a higher temperature. The elastic behavior of C-S-H with a low C/S ratio is generally higher than the high C/S.

Degradation of thermal stability and micromechanical properties of C-S-H phase induced by ultra-confined water at elevated temperatures

Long-term Thermal Performance of Oil Well Cement Modified by Silica Flour with Different Particle Sizes in HTHP Environment

Effects of high temperature on the mechanical behavior of calcium silicate hydrate under uniaxial tension and compression

C−S−H gel structure and water molecules behaviors under different chemical environments in a range of temperatures

Effect of Water on the Dynamic Tensile Mechanical Properties of Calcium Silicate Hydrate: Based on Molecular Dynamics Simulation

Hydration Properties and Interlayer Organization in Synthetic C-S-H

Insights into the effect of high temperature on the shear behavior of the calcium silicate hydrate by reactive molecular dynamics simulations

Influence Mechanism of the Interfacial Water Content on Adhesive Behavior in Calcium Silicate Hydrate−Silicon Dioxide Systems: Molecular Dynamics Simulations

How much water is there within calcium silicate hydrates? Probing water dynamics by Inelastic Neutron Scattering and Molecular Dynamics Simulations

Insight into Class G Wellbore Cement Hydration and Mechanism at 150 °C Using Molecular Dynamics

Reactive molecular dynamics simulation on the structure characteristics and tensile properties of calcium silicate hydrate at various temperatures and strain rates

The nanomechanical nature of cementitious calcium-(alumino)silicate-hydrate under ultra-low temperature attack: An intrinsic transition and the role of aluminum for bottom-up enhancement

Full process of calcium silicate hydrate decalcification: Molecular structure, dynamics, and mechanical properties

Effect of Ca/Si and Al/Si on micromechanical properties of C(-A)-S-H

Time-varying moisture characteristics and C-S-H gel properties of concrete in dry and hot environments

Effect of Silica Crystalline State on Hydration Products of Tricalcium Silicate at High Temperatures

Degradation of C–S–H(I) at different decalcification degrees

Stress relaxation properties of calcium silicate hydrate: a molecular dynamics study

Multi-scale investigation on composition-structure of C-(A)-S-H with different Al/Si ratios under attack of decalcification action

Temperature Effect of Hydration and Microstructure of Tricalcium Silicate–Slag Powder Hydrated Composites: An Experimental and Molecular Dynamics Investigation

Insight into the local C-S-H structure and its evolution mechanism controlled by curing regime and Ca/Si ratio