An Online Calibration Method Using Hadamard–Fourier Clustering and Neural Network for Large-Scale Phased Arrays

Zahra Sarayloo,Nasser Masoumi,Ehsan Haj-Mirza-Alian,Naimeh Ghafarian,Mohammad Reza Nezhadahmadi,Majid Nili Ahmadabadi,Safieddin Safavi-Naeini
DOI: https://doi.org/10.1109/tim.2024.3364261
IF: 5.6
2024-03-02
IEEE Transactions on Instrumentation and Measurement
Abstract:This article proposes a novel online calibration method based on clustering for large-scale phased array antennas. The proposed clustering method leverages Hadamard and Fourier (HaF) transform features, resulting in increased output power variation (suitable for large phased array calibration), noise robustness, and fewer measurements compared with traditional methods. In addition, it eliminates the need for extra phase measurement instruments, as it relies solely on power measurements. Analytical closed forms are derived to demonstrate the effectiveness of HaF clustering. In this method, the mean phase error (MPhE) in each cluster is determined by a combination of Hadamard features and the extended rotational electrical vector (eREV) field method. Using a trained multilayer perceptron (MLP) neural network and feeding it with each cluster's MPhEs, the direction of arrival (DOA) error is determined. Subsequently, antenna phase errors are estimated based on the DOA error, and new calibration coefficients are applied to the array. To validate the proposed online calibration method, Monte Carlo simulations and experimental measurements were conducted on a 1024-element modular planar phased array receiver within the frequency range of 18–21 GHz and an angle of elevation range between −70° and 70°. The simulation and experimental results indicate a mean absolute error (MAE) value of approximately 6° for phase error determination and a DOA estimation error of less than 0.1° using the MLP. Furthermore, the array can be calibrated with a maximum calibration error of less than 0.1° within a period of 3 ms.
engineering, electrical & electronic,instruments & instrumentation
What problem does this paper attempt to address?