Abstract:The emerging photovoltaic technology, namely perovskite photovoltaics, follows a style to the blooming flower with superficial prosperity described by the ancient poet Yuxi Liu. Metal-halide perovskite has become one of the most promising photovoltaic materials for thin-film solar-cell applications, mainly due to its exellent visible light capture capability, large diffusion coefficients and long diffusion lengths of charge carriers (both electrons and holes). The reported power conversion efficiency of laboratory produced perovskite solar cells (PSCs) has exceeded 25%. However, this value was only achieved for devices of less than 0.1 cm(2)dimensions, and decreases significantly with the increase in area (for example, down to 11.6% for a device area of similar to 800 cm(2), showing the issues with the scalability). In PSCs, the electron transport layer (ETL) has to perform two essential functions, which are related: (i) to collect and transfer charges after the injection of electrons from the perovskite light harvester; and (ii) to block the backflow of holes, thus realizing effective charge separation and suppressing charge carrier recombination. However, there are several critical issues associated with the ETLs which limit the further development of the PSCs. For example, the experimentally obtained open-circuit voltages in PSCs are typically much lower compared to the theoretical voltage limit with their optical bandgaps between 1.59 and 1.63 eV. This is mainly attributed to inefficient charge transport in the PSCs due to inhomogeneous charge accumulation and serious interfacial recombination at the interfaces between the ETL and the perovskite active layer. We scan recent developments of ETLs in PSCs, and discuss design methodologies, mechanisms, processing and characterization of new types of ETLs. High power conversion efficiency with large open-circuit voltages/photo-currents could be achieved through designing materials and microstructures for high-quality ETLs with a high electron mobility, high electrical conductivity and pinhole-free film morphology. It is crucial to balance the charge diffusion processes in the respective charge collective layers of PSCs as the interfaces between the ETLs and perovskites along with their interfacial structures play key roles in achieving new solid-state mesoscopic solar cells optimized open circuit voltages and output photocurrents.

In Situ Interface Engineering for Highly Efficient Electron-Transport-Layer-Free Perovskite Solar Cells

Interface Engineering for Efficient ETL-free Perovskite Solar Cells Via Self-Assembled Bifunctional Monolayer

Synergistic Interface Energy Band Alignment Optimization and Defect Passivation toward Efficient and Simple‐Structured Perovskite Solar Cell

In situ Blending For Co‐Deposition of Electron Transport and Perovskite Layers Enables Over 24% Efficiency Stable Inverted Solar Cells

Stable Electron-Transport-Layer-Free Perovskite Solar Cells with over 22% Power Conversion Efficiency

In situ interface engineering via gradient rubidium doped perovskite for efficient electron-transport-layer-free photovoltaics

Unfused Electronic Acceptor-Based Polymers as Interfacial Materials for Efficient Inverted Perovskite Solar Cells

Outstanding Performance Of Electron-Transport-Layer-Free Perovskite Solar Cells Using A Novel Small-Molecule Interlayer Modified Fto Substrate

Advances in design engineering and merits of electron transporting layers in perovskite solar cells

In Situ Electron Transport Layers by a Carboxyl Ionic Liquid-Assisted Microwave Technique for a 20.1% Perovskite Solar Cell

Toward Efficient and Stable Perovskite Solar Cells by 2D Interface Energy Band Alignment

Multifunctional self‐assembled ionic liquid modified rigid and flexible substrates for efficient simple‐structured perovskite solar cells

In situ Ligand‐Managed SnO2 Electron Transport Layer for High‐Efficiency and Stable Perovskite Solar Cells

Design and simulation investigations on electron transport layer-free in tin-based p-n homojunction perovskite solar cells

Intermediate-Controlled Interfacial Engineering for Stable and Highly Efficient Carbon-Based PSCs

Perovskite photovoltaic interface: From optimization towards exemption

High-Efficiency Perovskite Solar Cells with Improved Interfacial Charge Extraction by Bridging Molecules

Efficient Inverted Perovskite Photovoltaics Through Surface State Manipulation

Vertical Phase Separated Cesium Fluoride Doping Organic Electron Transport Layer: A Facile and Efficient “bridge” Linked Heterojunction for Perovskite Solar Cells

Salt‐Based Catalyzer to Aid Heterogeneous Nucleation Enabling >23% Efficient Electron‐Transport‐Layer‐Free Perovskite Solar Cells

Efficient Planar Perovskite Solar Cells with Low-Temperature Atomic Layer Deposited TiO2 Electron Transport Layer and Interfacial Modifier