Abstract:A novel adsorbent material, TEOS‐g‐LDH‐Fe/rGO, was synthesized and characterized. The sorption potential of this material was assessed under various operating conditions, revealing noteworthy results. The experimental data were analyzed using Response Surface Methodology (RSM) coupled with a central composite design. The outcomes highlight the consistent stability, reusability, and high‐performance characteristics of the material in a simulated groundwater system. Both experimental equilibrium and kinetic data were meticulously analyzed using a non‐linear curve fitting method. This study establishes TEOS‐g‐LDH‐Fe/rGO as a promising solution for mitigating serious environmental threats arising from arsenic contamination. A novel adsorbent material, graphene decorated silane modified layered clays enriched with Fe(III) (TEOS‐g‐LDH−Fe/rGO) was prepared via emulsion polymerization followed by in situ precipitation and its physicochemical characterization carried out by FTIR, XRD, SEM‐EDS, HRTEM, TG‐ DTG, XPS and Raman analysis. The TEOS‐g‐LDH−Fe/rGO composite utilized for the effective removal of As(V) from aqueous system and the process followed via inner‐sphere surface complexation through ligand exchange between hydroxyl groups in TEOS‐g‐LDH−Fe/rGO and As(V) species. The equilibrium data fitted well with Langmuir model and kinetic data with mixed batch model showed remarkable adsorption capacity of 103.91 mg/g at pH 5.5. The synergistic effects associated with precursors in the composite profoundly improved the removal efficiency of As(V). The optimal conditions for As(V) removal was evaluated by RSM coupled with central composite design(CCD) considering pH(3–6), dose(0.5–2.5) and time (1–80 min) at temperature 30 °C. The sorption efficacy of TEOS‐g‐LDH−Fe/rGO was found to be about four times greater than its precursors. In simulated water matrix, the TEOS‐g‐LDH−Fe/rGO exhibit a retention of sorption performance (90 %) from 98.8 % of its initial sorption capacity for As(V) removal during regeneration. This work proves TEOS‐g‐LDHFe/rGO as a promising candidate for addressing grievous environmental threats from arsenic contamination.

Novel carbohydrate derived nanocomposite materials for efficient arsenic and fluoride elimination

Modified Native Cellulose Fibers-A Novel Efficient Adsorbent For Both Fluoride And Arsenic

Facile construction of graphene oxide and iron organic frameworks decorated biopolymeric hybrid materials for fluoride uptake from water

3D composite carbon Foam-Loaded MnO 2 and FeOOH enabling the "oxidation-adsorption" effect toward efficient removal of arsenic from groundwater

Novel Composite Adsorbents Preparation Through in Situ Coating and Embedded Regeneration for the Simultaneous Removal of As(III) and As(V) from Drinking Water

Concurrent elimination of arsenic and nitrate from aqueous environments through a novel nanocomposite: Fe 3 O 4 -ZIF8@eggshell membrane matrix

Graphene Oxide/cufe2o4 Foam As an Efficient Absorbent for Arsenic Removal from Water

Simultaneous removal of arsenate and arsenite in water using a novel functional halloysite nanotube composite

Cellulose nanocrystal-infused polymer hydrogel imbued with ferric-manganese oxide nanoparticles for efficient antinomy removal

Design and synthesis of biopolymer-derived porous graphitic carbon covered iron-organic frameworks for depollution of arsenic from waters

Novel chitosan goethite bionanocomposite beads for arsenic remediation

A novel graphene oxide-microalgae hybrid material for the removal of pentavalent arsenic from natural water and industrial wastewater

Synthesis and Sorption Profiles of Graphene‐Decorated Silane‐Modified Layered Clays for As(V) Removal: A Quantitative Assessment and Mechanistic Insights

Simultaneous Removal of As(III) and Fluoride Ions from Water Using Manganese Oxide Supported on Graphene Nanostructures (GO-MnO2)

Synthesis, characterization and application of Carboxylmethyl cellulose, Guar gam, and Graphene oxide as novel composite adsorbents for removal of malachite green from aqueous solution

Efficiency and synergy of MnO2@LDO for arsenic and fluoride simultaneous sorption from water

Iron Oxide-Chitosan-Based Nanocomposite for Efficient Fluoride Removal From Drinking Water

Efficient removal of fluoride using new composite material of biopolymer alginate entrapped mixed metal oxide nanomaterials

Graphene oxide/polydopamine modified montmorillonite/carboxymethyl chitosan composite aerogel for efficient removal of Pb 2+ , Cu 2+ , and Cd 2+ : Adsorption behavior, mechanism and DFT study

Graphene-Based Adsorbents for Arsenic, Fluoride, and Chromium Adsorption: Synthesis Methods Review

Preparation of ferric nitrate–graphene nanocomposite and its adsorption of arsenic(V) from simulated arsenic‐containing wastewater