Enhancing attapulgite and cement-modified loess for effective landfill lining: A study on seepage prevention and Cu/Pb ion adsorption

Zhengrui Zhang,Siti Jahara Matlan,Lili Zhang,Ahad Amini Pishro,Mojdeh Amini Pishro,Xian Gao,Nazaruddin Abdul Taha,Yuxin Zhou

DOI: https://doi.org/10.1515/geo-2022-0617

2024-01-01

Open Geosciences

Abstract:Abstract This study aims to use attapulgite (ATT) and cement to modify loess as the lining material of landfills in loess areas and to exert the adsorption property of modified loess to ensure seepage prevention. It provides a safe, efficient, low-cost anti-seepage material for constructing a landfill in a loess area. For ATT-modified loess, when the content of ATT is less than 10%, the decrease rate of permeability coefficient is obvious, and when the content is more than 10%, the decrease rate becomes slow. After adding 5% cement on this basis, the permeability coefficient of ATT cement-modified loess is 8 × 10 −8 cm/s, which meets the standard requirements (≤10 −7 cm/s). The results show that the adsorption of Cu and Pb ions on ATT cement-modified loess is higher than that on pure loess. Cu and Pb ions’ adsorption rates are 99.2 and 98.5% in a single solution. In the mixed solution, the adsorption rates of copper and lead ions were 97.5 and 98.2%, respectively. Therefore, the study obtained the ratio of modified loess (85% loess + 10% ATT + 5% cement) that can not only meet the seepage prevention requirements of the landfill but also can adsorb heavy metal ions in the leachate, providing security for the landfill.

geosciences, multidisciplinary

What problem does this paper attempt to address?

The paper aims to address the issues of anti-seepage and heavy metal ion adsorption in landfills. Specifically, the study uses attapulgite (ATT) and cement-modified loess as anti-seepage materials to improve the anti-seepage performance of landfills and enhance their ability to adsorb heavy metal ions (such as copper and lead) in leachate. The main objectives of the study include:

1. **Permeability of modified loess**: By adding different proportions of attapulgite and cement, the study found that when the attapulgite content is below 10%, the permeability coefficient significantly decreases; after exceeding 10%, the rate of decrease in the permeability coefficient slows down. After further adding 5% cement, the permeability coefficient of the modified loess reaches 8×10^−8 cm/s, meeting the anti-seepage standard (≤10^−7 cm/s).

2. **Heavy metal ion adsorption capacity**: Experiments show that the modified loess has adsorption rates of 99.2% and 98.5% for copper and lead ions, respectively, and adsorption rates of 97.5% and 98.2% in mixed solutions. This indicates that the modified loess not only meets the anti-seepage requirements but also effectively adsorbs heavy metal ions in the leachate, thereby ensuring the safety of the landfill.

Through these studies, the authors propose a proportion of modified loess (85% loess + 10% attapulgite + 5% cement) that can meet the anti-seepage requirements and effectively adsorb heavy metal ions.