Abstract:Effect of nanoclay modified epoxy in interfacial adhesion of Ti‐FML. Delamination due to interfacial debonding between metal/composite is identified as a potential failure mechanism of fiber metal laminates (FML). In the present study, titanium based fiber metal laminate (Ti‐FML) were fabricated using different wt% of nanoclay modified epoxy as adhesive. Kevlar/jute fibers bidirectionally woven mat was used to prepare the composite layer in the laminate. The laminates produced using compression molding techniques were studied for tensile, flexural, impact load bearing capacity and adhesive strength based on lap shear and peel test following ASTM standards. Lap shear adhesive strength of nanoclay modified epoxy was enhanced to 27 MPa and interlaminar peel strength was increased to 16.8 N/mm in the laminates, when the amount of nanoclay was increased to 8 wt%. Matrix crack deflection and crack bridging due to the presence of nanoclay was identified as potential mechanism for increasing the adhesive strength of epoxy. Enhanced adhesive strength resulted in improved mechanical characteristics of Ti‐FML, exhibiting notable increases in tensile load bearing capacity at 15.5 kN, flexural peak load at 0.36 kN, and bending strength at 890 MPa, achieved with a 7 wt% increase in nanoclay content. Fiber breakage and plastic deformation of metal combinedly developed the failure deformation, load bearing and energy absorption capacity of the laminate. Hybridization of fibers kevlar/jute played a significant role in enhancing the energy absorption capacity of laminates. The developed material can find applications in aerospace structures, automotive components, and marine environments where superior mechanical performance and durability are essential. Highlights Nanoclay‐modified titanium‐based FMLs with kevlar/jute hybrid fiber mats prepared. The adhesive strength of nanoclay‐modified epoxy increased due to crack deflection and bridging, enhancing the load‐bearing capacity of the titanium FML. Improved adhesive strength controlled delamination failure in tensile and flexural tests. The laminate's impact energy absorption capacity was enhanced by nanoclay, hybrid kevlar/jute fiber composite, and titanium ductility.

Multi-Scale Mechanical Behavior of Liquid Elium® Based Thermoplastic Matrix Composites Reinforced with Different Fiber Types: Insights from Fiber–Matrix Adhesion Interactions

Mechanical Properties Study on Sandwich Composites of Glass Fiber Reinforced Plastics (GFRP) Using Liquid Thermoplastic Resin, Elium®: Preliminary Experiments

Study of the thermomechanical behavior of composite based on Elium acrylic resin, carbon nanotubes, and flax fibers: Experimental approach

Fatigue behavior and self-heating mechanism of novel glass fiber reinforced thermoplastic composite

Influence of physical ageing and fibre proximity on the local mechanical response of the Elium® thermoplastic composite matrix

Comparative Performance of Kevlar, Glass and Basalt Epoxy- and Elium-Based Composites under Static-, Low- and High-Velocity Loading Scenarios—Introduction to an Effective Recyclable and Eco-Friendly Composite

The role of the fiber–matrix interface in the tensile properties of short fiber–reinforced 3D‐printed polylactic acid composites

Interlaminar Shear Strength Behavior of Carbon Fiber Reinforced Aluminum Alloy Laminate

Effect of Fiber-Matrix Interface Friction on Compressive Strength of High-Modulus Carbon Composites

Effect of Nanoclay Addition on Mechanical and Microstructure Properties of E-Glass Fiber and AA2022 Metal Skin Reinforced Epoxy Laminates

Investigation of Fiber–Matrix Interface Strength via Single-Fiber Pull-Out Test in 3D-Printed Thermoset Composites: A Simplified Methodology

Multiscale Analysis of Impact-Resistance in Self-Healing Poly(ethylene-co-methacrylic acid) (EMAA) Plain Woven Composites

Evolution of Physical, Thermal, and Mechanical Properties of Poly(methyl Methacrylate)-Based Elium Thermoplastic Polymer During Polymerization

Adhesion strength and mechanical properties of nanoclay modified hybrid kevlar/jute‐epoxy fiber metal laminate

Investigation on Ultrasonic Welding Attributes of Novel Carbon/Elium® Composites

Interfacial properties of carbon fiber‐reinforced biobased resin composites by single fiber fragmentation, fiber push‐out, and interlaminar shear strength

Damage development in woven carbon fibre thermoplastic laminates with PPS and PEEK matrices: A comparative study

Modeling the Role of Bulk and Surface Characteristics of Carbon Fiber on Thermal Conductance across the Carbon-Fiber/Matrix Interface

Modeling the elastoplastic behavior of agave fiber prior and after its incorporation within a thermoplastic matrix: Analysis of the fiber aspect ratio on the mechanical properties

Performance of polylactide biopolymer as matrix material for woven fiber composite laminates

Multiscale analysis method and experiments for the transverse mechanical property of unidirectional fiber-reinforced composites