Abstract:The importance of phosphates has sparked researchers’ considerable interest in the electrochemical detection of phosphates within aqueous solutions in recent years. In this study, we present a novel all-solid-state phosphate ion-selective electrode (ISE) that integrates copper, copper nanoparticles, and copper phosphate. By modifying the copper substrate of the electrode with a copper nanoparticle film and creating a lamellar copper phosphate film through electrochemical treatment, we significantly enhanced the electrode’s electron transfer efficiency. This microstructure with large specific surface area markedly improved the electrode’s responsiveness to the targeted ions by accelerating the achievement of chemical equilibrium on the electrode surface, thereby boosting its sensitivity and stability. The newly developed electrode was capable of detecting phosphate ions in solutions with a pH range from 6 to 11 and performed optimally in neutral solutions at pH 7, following Nernst principle, with a detection limit of 1 × 10−6 M. The electrode exhibited a short response time of less than 10 s with significant reproducibility, stability, longevity—maintaining functionality for more than two months. It also displayed good selectivity as the electrochemical equilibrium was not influenced by up to 1 mM of potential competing species like HCO3−, NO3−, Cl− and SO42−. We compared the detection results of current phosphate ion sensor and conventional determination methods for phosphate content in natural lake and aquaculture water samples, with a detection discrepancy of about 10% (RSD). Considering all feasible performance characteristics combined with its low cost, simple manufacture and portability, the sensor provides a new possibility for rapid, reliable, and long-term real-time in situ detection of phosphates.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to develop an electrochemical phosphate - ion sensor that is efficient, accurate, low - cost, easy to operate and has a long lifespan. Specifically, the research objective is to design a phosphate - ion - selective electrode (ISE) based on an all - solid - state copper electrode, and electrochemically modify the surface of the copper electrode to improve its detection performance for phosphate - ions.
### Core issues of the paper
1. **Background issues**:
- Excessive accumulation of phosphates in water bodies can lead to eutrophication problems, which in turn trigger a series of environmental problems such as algal blooms, hypoxia, acidification and biodiversity crises.
- Real - time monitoring of phosphate concentrations is crucial for assessing water quality and health conditions, especially in natural water bodies, soilless cultivation and aquaculture systems.
- Although the commonly used phosphomolybdenum blue spectrophotometry and ion chromatography methods are highly sensitive at present, they require sample pretreatment, are complex to operate, time - consuming and costly, and are difficult to meet the needs of long - term real - time online monitoring.
2. **Technical challenges**:
- Phosphate - ions have a large tetrahedral structure, resulting in high hydration energy and are easy to stay in aqueous solutions, making the ion - selective electrode have poor selectivity for their detection.
- Phosphate - ions will undergo three - stage dissociation under different pH conditions, and the changes in their valence states and distribution ratios increase the difficulty of quantitative detection.
3. **Research objectives**:
- Develop a new all - solid - state phosphate - ion - selective electrode based on a copper electrode.
- Enhance the electron transfer efficiency of the electrode and its response ability to the target ions through electrochemical deposition of copper nanoparticle films and electrochemical synthesis of copper phosphate - sensitive films.
- Achieve detection of phosphate - ions in a wide pH range (6–11), especially high sensitivity and stability under neutral and weakly alkaline conditions.
### Key points of the solution
- **Material design**: Utilize the composite structure of copper nanoparticles and copper phosphate to form a reticular film with a large specific surface area to improve the sensitivity and stability of the electrode.
- **Electrochemical modification**: Prepare a uniform copper nanoparticle film on the surface of the copper electrode by electrochemical methods, and further form a copper phosphate - sensitive film.
- **Performance optimization**: Use cyclic voltammetry, scanning electron microscopy and energy - dispersive spectroscopy analysis and other means to study the response mechanism of the electrode, and systematically evaluate its detection limit, response time, selectivity, reproducibility, stability and lifespan.
### Summary
This paper aims to solve the problems of complexity, high cost and inability to achieve long - term real - time monitoring in existing phosphate - ion detection methods, and proposes a new phosphate - ion sensor based on electrochemically modified copper electrodes. This sensor not only has high sensitivity and stability, but also has the advantages of low cost, easy operation and long lifespan, providing new possibilities for rapid, reliable and long - term real - time detection of phosphates in water bodies.