Abstract:Magnesium-zinc-calcium (Mg-Zn-Ca) alloys as a biomaterial have attracted much attention recently, owing to their excellent biocompatibility, similar mechanical properties to natural bone, and biodegradable properties. Despite the numerous advantages of MgZnCa alloys, the rapid degradation of magnesium proved challenging as the implant in unable to retain its structural integrity for a sufficient duration of time. For metallic glasses, the capability to produce a bulk sample that is sufficiently large for useful applications have been far less successful owing to challenging processing parameters that are required for rapid cooling. In this study, Mg65Zn30Ca5 melt-spun ribbons were produced using melt-spinning followed by spark plasma sintering under high pressure (60 MPa) at different temperatures (130–170 °C) to provide an insight into the consolidation, mechanical, and corrosion behavior. Microstructural interfaces were characterized using scanning electron microscopy while the thermal stability of the amorphous phase was characterized using differential scanning calorimetry and X-ray diffraction. Here, pellets with 10 mm diameter and 10 mm height with a complete amorphous structure were achieved at a sintering temperature of 150 °C with densification as high at ~98%. Sintering at higher temperatures, while achieving higher densification, resulted in the presence of nano-crystallites. The mechanical properties were characterized using microhardness and compression tests. The hardness values of the sintered products were relatively higher to those containing crystallite phases while the ultimate compressive strength increased with increasing sintering temperature. Bio-corrosion properties were characterized via electrochemical testing with PBS as the electrolyte at 37 °C. The corrosion results suggest that the sintered samples have a significantly improved corrosion resistance as compared to as-cast samples. More notably, SPS150 (samples sintered at 150 °C) exhibited the best corrosion resistance (35× compared to as-cast in the context of corrosion current density), owing to its single-phase amorphous nature. This study clearly shows the potential of spark plasma sintering in consolidating amorphous ribbons to near-full density bulk pellets with high corrosion resistance for bio-applications.

Enhanced Corrosion Resistance in High-Strength Biodegradable Mg-Zn-Ca-Si Glassy Alloy Composite via Preparation of a Self-Sealing Plasma Electrolytic Oxidation Layer

Self-repairing Capability of Magnesium Alloy During the Plasma Electrolytic Oxidation Process

Development of Biocompatible Bulk MgZnCa Metallic Glass with Very High Corrosion Resistance in Simulated Body Fluid

Enhancing the corrosion resistance of a novel bio-compatible Mg-1Zn-0.45Ca alloy in simulated body fluid by a phosphate treated PEO coating

Enhancing biocompatibility of magnesium implants: nanocomposite coating for corrosion resistance and bioactivity

Advances in amelioration of plasma electrolytic oxidation coatings on biodegradable magnesium and alloys

Self-assembly Zn-containing layer on PEO-coated Mg with enhanced corrosion resistance, antibacterial activity, and osteogenic property

A SiO2 layer on PEO-treated Mg for enhanced corrosion resistance and bone regeneration

Biocompatibility and bone regeneration of PEO/Mg-Al LDH-coated pure Mg: an in vitro and in vivo study

New biodegradable Mg–Zn–Ca bulk metallic glass composite with large plasticity reinforced by SnZn alloy

Enhanced corrosion resistance of magnesium alloy by plasma electrolytic oxidation plus hydrothermal treatment

Surface Engineering of Biodegradable Magnesium Alloys for Enhanced Orthopedic Implants.

Biodegradation and Cell Behavior of a Mg-Based Composite with Mesoporous Bioglass

Bioactivity Performance of Pure Mg after Plasma Electrolytic Oxidation in Silicate-Based Solutions

Study on bio-corrosion and cytotoxicity of a Sr-based bulk metallic glass as potential biodegradable metal

Biodegradable Mg–Zn–Ca–Y Glass-Forming Alloy with an Amendment in Mechanical Properties and Corrosion Resistance

Core-shell Mg66Zn30Ca4 bulk metallic glasses composites reinforced by Fe with high strength and controllable degradation

Mechanical Characteristics of an Anodized Magnesium Alloy for Biodegradable Implants

Study on glass-forming ability and corrosion performance of Ca-based biomedical materials

Enhanced corrosion resistance and cytocompatibility of biodegradable Mg alloys by introduction of Mg(OH)2 particles into poly (L-lactic acid) coating

Biodegradable Mg–Zn–Ca-Based Metallic Glasses