Abstract:Fractured crystalline rocks have been chosen or are under consideration by several countries as host rock formations for deep geological repositories for spent nuclear fuel. In such geological formations, flow and solute transport are mostly controlled by a network of connected natural fractures, each of them being characterised by internal heterogeneity, also denoted as roughness. Fractures are, in turn, subject to variable load caused by various factors, such as the presence of thick ice sheets formed during glaciation periods. Understanding how coupled hydro-mechanical (HM) processes affect flow and transport at the scale of a single natural fracture is crucial for a robust parameterisation of large-scale discrete fracture network models, which are not only used for nuclear waste disposal applications but are also of interest to problems related to geothermics, oil and gas production or groundwater remediation. In this work, we analyse and model an HM experiment carried out in a single natural fracture and use the results of both, the experimental and the modelling work, to get insights into fundamental questions such as the applicability of local cubic law or the effect of normal load on channeling. The initial fracture aperture was obtained from laser scanning of the two fracture surfaces and an equivalent initial aperture was then defined by moving the two fracture surfaces together and comparing the results obtained using a Navier–Stokes based computational fluid dynamics (CFD) model with the experimental flowrate obtained for unloaded conditions. The mechanical effect of the different loading stages was simulated using a high-resolution contact model. The different computed fracture apertures were then used to run groundwater flow simulations using a modified Reynolds equation. The results show that, without correction, local cubic law largely overestimates flowrates. Instead, we show that by explicitly acknowledging the difference between the mechanical aperture and the hydraulic aperture and setting the latter equal to 1/5 of the former, cubic law provides a very reasonable approximation of the experimental flowrates over the entire loading cycle. A positive correlation between fluid flow channeling and normal load is also found.

Geometric model of the fracture as a manifold immersed in porous media

Fracture Model Reduction and Optimization for Forchheimer Flows in Reservoir

Flow in Porous Media with Fractures of Varying Aperture

Coupling of flow, contact mechanics and friction, generating waves in a fractured porous medium

A model for saturated–unsaturated flow with fractures acting as capillary barriers

Simulation of coupled multiphase flow and geomechanics in porous media with embedded discrete fractures

Comparison and Application of non-Conforming Mesh Models for Flow in Fractured Porous Media using dual {L}agrange multipliers

A Comparison of Discrete Fracture Models for Single Phase Flow in Porous Media Using COMSOL Multiphysics ® Software

The hybrid dimensional representation of permeability tensor: a reinterpretation of the discrete fracture model and its extension on nonconforming meshes

A simple embedded discrete fracture-matrix model for a coupled flow and transport problem in porous media

A Computational Workflow for Flow and Transport in Fractured Porous Media Based on a Hierarchical Nonlinear Discrete Fracture Modeling Approach

Numerical analysis of a mixed-dimensional poromechanical model with frictionless contact at matrixâ€“fracture interfaces

Flow in Fractured Porous Media: A Review of Conceptual Models and Discretization Approaches

A Novel Numerical Model for Fluid Flow in 3D Fractured Porous Media Based on an Equivalent Matrix-Fracture Network

Flow and transport in three-dimensional discrete fracture matrix models using mimetic finite difference on a conforming multi-dimensional mesh

Experimental and numerical analysis of flow through a natural rough fracture subject to normal loading

Evolution and Evaluation of the Non-Darcy Effects for Partially Filled Fractures

Coupled Geomechanics and Fluid Flow Modeling in Naturally Fractured Reservoirs

Numerical analysis of a mixed-dimensional poromechanical model with frictionless contact at matrix-fracture interfaces

An efficient 3D cell-based discrete fracture-matrix flow model for digitally captured fracture networks

A discrete fracture model for two-phase flow involving the capillary pressure discontinuities in fractured porous media