Abstract:The sole micropores strictly restrict the wide utilization of TS-1 zeolite in the catalytic fields, especially in the catalytic conversion of compounds with large molecular sizes. Here, we report a feasible and economical method to overcome this drawback. In this work, the hierarchical TS-1 zeolite was constructed via post-acid treatment, post-alkali etching, and a combination of post-acid treatment and alkali etching methods, after which, the corresponding NiMo-supported catalysts were prepared via the incipient wetness impregnation method. Then, the aforementioned materials were fully characterized using X-ray diffraction (XRD), N-2 adsorption-desorption, pyridine adsorbed Fourier transform infrared spectroscopy (Py - FTIR), H-2 temperature programmed reduction (H-2 - TPR), X-ray photoelectron spectroscopy (XPS), and high-resolution transition electron microscope (HR-TEM) to unravel the changes in the physicochemical properties caused by the post treatments. Finally, the hydrodesulfurization of dibenzothiophene (DBT) was used as a probe to assess the effects of the post-treatments on the catalytic performance of the hierarchical NiMo/TS-1 catalysts. The results showed that the MFI topology of TS-1 zeolite remained undamaged significantly and the serial hierarchical TS-1 zeolites exhibited higher specific surface areas and mesopore structures. Moreover, appropriate amounts of Bronsted acid sites were formed at the surface of the serial hierarchical TS-1 zeolites. The interaction between the active metals and the support materials was also modulated by the post-treatment of TS-1 zeolite, which resulted in better dispersion of Ni promoted MoS2 slabs with a higher proportion of NiMoS active phase, further leading to the enhanced catalytic activity and direct desulfurization pathway selectivity of the corresponding serial hierarchical NiMo/TS-1 catalysts. Among all the prepared catalysts, the catalytic activity was enhanced by approximately 1.2 times over catalyst NiMo/AT-TS-1 obtained by post-acid treatment compared to that over catalyst NiMo/TS-1 without treatment and on which the selectivity of the DDS pathway was 22% higher compared to that over catalyst NiMo/TS-1.

Adsorptive properties in toluene removal over hierarchical zeolites

Hierarchical TS-1 zeolite loaded with NiMo catalysts: Preparation and performance in hydrodesulfurization

Adsorption performance and kinetic study of hierarchical porous Fe-based MOFs for toluene removal

Transalkylation Properties of Hierarchical MFI and MOR Zeolites: Direct Synthesis over Modulating the Zeolite Grow Kinetics with Controlled Morphology

Silicalite-1 zeolites for toluene sorption: Effects of the particle size and intracrystalline mesopores

Adsorptive removal of toluene and dichloromethane from humid exhaust on MFI, BEA and FAU zeolites: An experimental and theoretical study

Hierarchical structure ZSM-5/SBA-15 composite with improved hydrophobicity for adsorption-desorption behavior of toluene

Preparation of Nano-Mfi Zeolites Doped with Al/Ti and Their Performance in VOC Sorption

Toluene Adsorption Properties of ZSM-5 Molecular Sieve Studied by Gravimetric Method

Fixed-bed adsorption of toluene on high silica zeolites: experiments and mathematical modelling using LDF approximation and a multisite model

Adsorption and Catalytic Ozonation of Toluene on Mn/ZSM-5 at Low Temperature

Facile fabrication of nanoscale hierarchical porous zeolitic imidazolate frameworks for enhanced toluene adsorption capacity

Synthesis and adsorption performance of hierarchical 5A Zeolite for normal paraffin adsorption

Hierarchical MFI Zeolite Synthesized Via Regulating the Kinetic of Dissolution-Recrystallization and Their Catalytic Properties

Investigation of MOF-derived humidity-proof hierarchical porous carbon frameworks as highly-selective toluene absorbents and sensing materials

Comparative studies on the toluene sorption performance over silicalite-1 zeolites with different morphologies

Enhanced hydrophobic microporous Pt/silica with high adsorption and catalytic oxidation for trace toluene removal

New Insights into Hierarchical Pore Size and Level of Concentration in Efficient Removal of Toluene Vapor by Activated Carbon.

Stable Metal-Organic Frameworks based mixed tetramethylammonium hydroxide for toluene adsorption

Adsorption of n-heptane, toluene and o-xylene on mesoporous UL-ZSM5 materials

Hierarchical Ti-Beta Zeolites with Uniform Intracrystalline Mesopores Hydrothermally Synthesized Via Interzeolite Transformation for Oxidative Desulfurization