Utilization of Qihuang residue-derived hydrogels for efficient removal of heavy metals and dyes from aqueous solutions

Xiaochun Yin,Pei Xu,Huiyao Wang
DOI: https://doi.org/10.1007/s10098-024-02895-y
IF: 4.3
2024-05-23
Clean Technologies and Environmental Policy
Abstract:Hydrogels derived from Qihuang residue (QH, a Chinese herb) were synthesized as adsorbents to remove heavy metals and dyes from aqueous solutions. The hydrogels were prepared by incorporating chitosan (CTS) and cross-linking with epichlorohydrin (EPI). After including CTS, rheological measurements demonstrated that the hydrogel had good mechanical properties with a storage modulus of 26,600 Pa for the QH/CTS-5-EPI hydrogel. Adsorption studies showed that the QH/CTS-5-EPI hydrogel exhibited the highest adsorption capacities, achieving 105.4 mg/g for Cu (II) and 557.0 mg/g for Cr (III) at pH 4.0, with an initial metal concentration of 700 mg/L. Furthermore, it achieved adsorption capacities of 102.7 mg/g for methylene orange (MO) at pH 2.0 and 111.6 mg/g for rhodamine B (RB) at pH 4.0, with an initial dye concentration of 300 mg/L. The adsorption kinetics and isotherms were described by the pseudo-second-order and Langmuir models, respectively, indicating a chemisorption and monolayer adsorption mechanism. The influence of ionic strength on adsorption performance showed that Na + and Cl − ions exerted different impacts, reducing the adsorption of Cu (II) and Cr (III) by approximately 72% and 37%, respectively, while for dyes, a modest increase was measured in removing RB and MO at their lower concentrations. Compared to previously reported adsorbents, the QH/CTS-5-EPI hydrogel exhibited superior adsorption performance for heavy metals and dyes. The saturated hydrogel was successfully regenerated and retained an adsorption capacity of > 70% after eight regeneration cycles. This demonstrates that Chinese herb residue-derived hydrogels are promising, environmentally friendly adsorbents for removing heavy metals and dyes.
environmental sciences,engineering, environmental,green & sustainable science & technology
What problem does this paper attempt to address?