Enhanced CMAS and hot corrosion degradation of YSZ thermal barrier coating with nano powders

Abdulkadir Ozcelik,Ayşegul Akdoğan Eker,Muhammet Karabaş,Ali Avci,Bedri Onur Kucukyildirim

DOI: https://doi.org/10.1016/j.surfcoat.2024.130624

IF: 4.865

2024-03-11

Surface and Coatings Technology

Abstract:Thermal barrier coatings are used to protect hot section parts of gas turbine engines. These coatings are subject to corrosion due to impurity elements in the fuel and dust absorbed from the atmosphere into the engine. The rough and porous surface nature of plasma-sprayed coatings facilitates the penetration of these factors into the coating. Coatings are damaged prematurely as a result of corrosion. In this study, nano-structure YSZ, YSZ + Al 2 O 3 , YSZ + TiO 2 , and YSZ + Al 2 O 3 + TiO 2 coatings were deposited on plasma sprayed YSZ coating by electrophoretic deposition method. Hot corrosion and CMAS resistance were investigated. The coatings were characterized by SEM, XRD, AFM, and microhardness before corrosion tests. The changes in the coatings after corrosion tests were characterized by SEM and XRD. The penetration behavior of corrosive factors was examined by elemental mapping with EDS. Nanostructure coatings deposited on APS YSZ made the surfaces of as-sprayed coatings more stable. The ability of these nanolayers to prevent pure penetration into coatings during hot corrosion and CMAS is limited. However, the Al 2 O 3 + TiO 2 -doped nanostructure YSZ reduced the bond-layer oxidation. In addition, the addition of Al 2 O 3 + TiO 2 to the EPD deposited layer also reduced the tetragonal-monoclinic phase transformation that occurred in YSZ as a result of corrosion. Al 2 O 3 and TiO 2 additives alone are not effective in improving the corrosion behavior of coatings. Nanostructured coatings deposited with the EPD technique can help protect plasma-sprayed thermal barrier coatings against corrosion.

physics, applied,materials science, coatings & films