Abstract:Monotonic circuits are a class of input–output mode (IOM) asynchronous circuits that are relaxed compared to quasi-delay-insensitive (QDI) IOM asynchronous circuits in terms of signaling the completion of internal processing. Some recent works have demonstrated the superiority of monotonic logic over QDI logic for arithmetic circuits such as adders and multipliers. This paper presents a new monotonic asynchronous two-bit full adder (TFA) that can be duplicated and cascaded to form a ripple-carry adder (RCA). While an RCA is a slow adder with respect to synchronous design, with respect to IOM asynchronous design an RCA is a noteworthy adder since it has perhaps the least reverse latency that is not attainable through other IOM asynchronous adders. Conventionally, an RCA is constructed via a cascade of one-bit full adders (OFAs). An OFA adds two input bits along with any carry input and produces a sum bit and any carry output. On the other hand, a TFA simultaneously adds two pairs of input bits along with any carry input and produces two sum bits and any carry output. Using our proposed monotonic TFA, we realized an RCA to compare its performance with RCAs constructed using different asynchronous OFAs, and RCAs constructed using existing TFAs. We considered the popular delay-insensitive dual-rail scheme for encoding the adder inputs and outputs, and two 4-phase handshake protocols, namely return-to-zero handshaking (R0H) and return-to-one handshaking (R1H) for communication separately. We used a 28 nm CMOS process for implementation and considered a 32-bit addition as an example. Based on the design metrics estimated, the following inferences were derived: (i) compared to the RCA using the state-of-the-art monotonic OFA, the RCA incorporating the proposed TFA achieved a 26% reduction in cycle time for R0H and a 28.5% reduction in cycle time for R1H while dissipating almost the same power; the cycle time governs the data application rate in an IOM asynchronous circuit, and (ii) compared to the RCA comprising an early output QDI TFA, the RCA incorporating the proposed TFA achieved a 22.3% reduction in cycle time for R0H and a 25.4% reduction in cycle time for R1H while dissipating moderately less power. Also, compared to the existing early output QDI TFA, the proposed TFA occupies 40.9% less area for R0H and 42% less area for R1H.

A new ripple carry adder structure based on a swing‐boosted full adder for concurrent error correction in low‐resolution pipeline analog‐to‐digital converters

A Novel RSD Correction for Pipeline ADC.

A Single-Stage Gain-Boosted Cascode Amplifier with Three-Layer Cascode Feedback Amplifier for Front-End SHA in High-Linearity Pipelined ADC

A Calibration Scheme for a 800-Ms/s 14 Bit Pipelined ADC in 28-Nm CMOS

An Asynchronous Early Output Full Adder and a Relative-Timed Ripple Carry Adder

Early Output Hybrid Input Encoded Asynchronous Full Adder and Relative-Timed Ripple Carry Adder

Asynchronous Ripple Carry Adder based on Area Optimized Early Output Dual-Bit Full Adder

Area/latency optimized early output asynchronous full adders and relative-timed ripple carry adders

Realized High-Performance Swing Compensator Approximate Reversible Full Adders Using Gate Diffusion Input Technique

Monotonic Asynchronous Two-Bit Full Adder

A 14b 500 MS/s Single-Channel Pipelined-SAR ADC With Reference Ripple Mitigation Techniques and Adaptively Biased Floating Inverter Amplifier

Design of multi-stage latency adders using detection and sequence-dependence between successive calculations

Asynchronous Early Output Dual-Bit Full Adders Based on Homogeneous and Heterogeneous Delay-Insensitive Data Encoding

Novel single layer fault tolerance RCA construction for QCA technology

A Fast and Cost-Effective Calibration Strategy of Inter-Stage Residual Amplification Errors for Cyclic-Pipelined ADCs

Efficient quantum-dot adder optimisation and analysis for future circuits

Multipurpose error calibration of pipeline analog‐to‐digital converters using decision points of the residue curve in sub‐analog‐to‐digital converters

Performance Comparison of some Synchronous Adders

A Novel Digital Calibration With Low Complexity For Pipelined Adc

A novel pipelined carry adder design based on half adder

Approximate Ripple Carry and Carry Lookahead Adders - A Comparative Analysis