Abstract:Abstract The scrape-off layer power width (λq) is an important parameter for characterizing the divertor heat loads. Many experimental, theoretical, and numerical studies on λq have been performed in recent years. In this paper, a 2D electrostatic turbulence code, BOUT-HESEL, has been upgraded to simulate H-mode plasmas for the first time. The code is validated against the previous implementation and the experimental λq scalings for L-mode plasmas and experiments with a typical EAST H-mode discharge. The simulated λq is found to agree quite well with the Eich scaling [Eich T. et al 2013 Nucl. Fusion 53 093031] for the EAST H-mode discharge and the comparison of the probability distribution function of the parallel particle flux with the measurements by reciprocating probes is also consistent. The code is utilized to simulate the ITER 15MA baseline scenario [Kim S. H. et al 2018 Nucl. Fusion 58 056013]. The ITER simulation reveals that the radial particle/heat transports are dominated by blobby transports, and predicts λ_{q,ITER} = 9.6 mm, which is much larger than the prediction by the Eich scaling (λ_{q,ITER} ≈ 1 mm). Based on the EAST modified cases, an estimated HESEL H-mode scaling, λq = 0.51R_c^1.1B_t^(-0.3)q_{95}^1.1 is proposed. This scaling predicts λ_{q,ITER} = 9.3 mm, which agrees surprisingly well with that for the ITER case. A further investigation combined with the basic parameters in the database of the Eich scaling shows that the missing positive scaling dependence on the machine size (R_c) in the Eich scaling appears to be shaded by the negative scaling dependence on the toroidal magnetic field (B_t) for current devices. This is however not the case for ITER, explaining why simulations in recent studies and in this paper can reproduce the Eich scaling for current devices, but predict a much larger λq for ITER. According to the simulation results, the strong positive scaling dependence of λq on Rc is due to a combination of slowing down the parallel heat transports by increasing the parallel connection length and the enhancement of the radial E×B turbulent heat transports when the machine size is increased.

Toroidal field and q 95 scalings on error field penetration in EAST

OV / 4-5 1 Overview of Experimental Results on the HL-2 A Tokamak

Overview of Experimental Results on the HL-2A Tokamak

OV / 4-3 1 Overview of Experimental Results on HL-2 A

Density scaling of error field penetration in radio-frequency-dominant heating plasmas in the EAST tokamak

Dependence of the Internal Inductance on the Radial Distance Between the Primary and Secondary X-point Surfaces in the EAST Tokamak

Penetration of n = 2 resonant magnetic field perturbations in EAST

Simulations of scrape-off layer power width for EAST H-mode plasma and ITER 15MA baseline scenario by 2D electrostatic turbulence code

Power Balance Investigation in Long-Pulse High-Performance Discharges with ITER-like Tungsten Divertor on EAST

The effect of plasma toroidal rotation on n=1 resonant magnetic perturbation field penetration under low neutral beam injection torque in EAST

The Scalings of the Thermal Energy Confinement Time in EAST H-mode Plasmas

Non-disruptive error field measurement in DIII-D low safety factor plasmas and projection to ITER

Error field penetration in J-TEXT tokamak based on two-fluid drift-MHD model

Integrated ELM and divertor power flux control using RMPs with low input torque in EAST in support of the ITER research plan

Error Field Predictability and Consequences for ITER

Penetration Properties of Resonant Magnetic Perturbation in EAST Tokamak

Calculation of in-situ steady-state heat flux on EAST lower divertor

Evaluation of Electromagnetic Interaction Between the PCI Platform and HL-2A Tokamak

Physical Design of a New Set of High Poloidal Mode Number Coils in the EAST Tokamak

Predictive multi-channel integrated modeling of a reversed magnetic shear H-mode discharge with internal transport barrier in EAST