Abstract:Summary Creating sufficient and sustained fracture conductivity contributes directly to the success of acid-fracturing treatments. The permeability and mineralogy distributions of formation rocks play significant roles in creating nonuniformly etched surfaces that can withstand high closure stress. Previous studies showed that, depending on the properties of formation rock and acidizing conditions (acid selection, formation temperature, injection rate, and contact time), a wide range of etching patterns (roughness, uniform, channeling) could be created that can dictate the resultant fracture conductivity. Insoluble minerals and their distribution can completely change the outcomes of acid-fracturing treatments. However, most experimental studies use homogeneous rock samples such as Indiana limestone that do not represent the highly heterogeneous features of carbonate rocks. This work studies the effect of heterogeneity and, more importantly, the distribution of insoluble rock on acid-fracture conductivity. In this research, we conducted acid-fracturing experiments using both homogeneous Indiana limestone samples and heterogeneous carbonate rock samples. The Indiana limestone tests served as a baseline. The highly heterogeneous carbonate rock samples contain several types of insoluble minerals such as quartz and various types of clays along sealed natural fractures. These minerals are distributed in the form of streaks correlated against the flow direction, or as smaller nodules. After acidizing the rock samples, these minerals acted as pillars that significantly reduced conductivity-decline rate at high closure stresses. Both X-ray diffraction (XRD) and X-ray fluorescence (XRF) tests were performed to pinpoint the type and location of different minerals on the fracture surfaces. A surface profilometer was also used to correlate conductivity as a function of mineralogy distribution by comparing the surface scans from after the acidizing test to the scans after the conductivity test. Theoretical models considering geostatistical correlation parameters were used to match and understand the experimental results. Results of our study showed that insoluble minerals with higher-strength mechanical properties were not crushed at high-closure stress, resulting in a less-steep conductivity decline with an increasing closure stress. If the acid etching creates enough conductivity, the rock sample can sustain a higher closure stress with a much lower decline rate compared with Indiana limestone samples. Fracture surfaces with insoluble mineral streaks correlated against the flow direction offer the benefit of being able to maintain conductivity at high closure stress, but not necessarily high initial conductivity. Using a fracture-conductivity model with correlation length, we matched the fracture-conductivity behavior for the heterogeneous samples. Fracture surfaces with mineral streaks correlated with the flow direction could increase acid-fracturing conductivity significantly as compared to the case when the streak is correlated against the flow direction. The results of the study show that fracture conductivity can be optimized by taking advantage of the distribution of insoluble minerals along the fracture surface and demonstrate important considerations to make the acid-fracturing treatment successful.

Influences of rock microstructure on acid dissolution at a dolomite surface

Experimental Study on the Dissolution Characteristics and Microstructure of Carbonate Rocks under the Action of Thermal–Hydraulic–Chemical Coupling

Study on the Microstructure Evolution and Strength Damage Mechanism of Dolomite under Dissolution Condition

Effect of Mixed Mineralogy on Etching Profile and Conductivity in Acid Fracturing in Naturally Fractured Carbonate Reservoirs

Experimental Investigation on Microstructure and Surface Morphology Deterioration of Limestone Exposed on Acidic Environment

Anisotropy of surface morphology of carbonate rocks after reaction with acid

Dissolution Kinetics and Heterogeneous Evolution of Dolomite with Different Pore Structures

Reaction Rates in Chemically Heterogeneous Rock: Coupled Impact of Structure and Flow Properties Studied by X-ray Microtomography.

Experimental simulation of dissolution law and porosity evolution of carbonate rock

Effects of Heterogeneity in Mineralogy Distribution on Acid-Fracturing Efficiency

Impact of Carbonate Content, Rock Texture, and Roughness on Fracture Transmissivity and Acid-Etching Patterns in Carbonate Rocks

Damage Time-Dependent Characteristics and Failure Mechanism of Limestone with Different Mineral Compositions Under Acid Hydro-Chemical Solution Erosion

Reservoir-condition pore-scale imaging of dolomite reaction with supercritical CO 2 acidified brine: Effect of pore-structure on reaction rate using velocity distribution analysis

Investigation of Nonlinear Flow Behavior Along a Rough-Walled Limestone Fracture With Acid Dissolution

Study on the mechanical and damage properties of laminated limestone under acid mine drainage dissolution

Study on the Performance Degradation of Sandstone under Acidification

Effects of Acid Sulfate and Chloride Ion on the Pore Structure and Mechanical Properties of Sandstone Under Dynamic Loading

A Thermodynamic Dissolution Model of Carbonate Rocks and Its Engineering Geological Significance

Effect of acid fracturing on carbonate formation in southwest China based on experimental investigations

Microscopic Damage to Limestone under Acidic Conditions: Phenomena and Mechanisms

Study on Mechanical Properties and Weakening Mechanism of Acid Corrosion Lamprophyre