Abstract:Introduction: L-lysine is a bulk product. In industrial production using high-biomass fermentation, the high density of bacteria and the intensity of production require sufficient cellular respiratory metabolism for support. Conventional bioreactors often have difficulty meeting the oxygen supply conditions for this fermentation process, which is not conducive to improving the sugar-amino acid conversion rate. In this study, we designed and developed an oxygen-enhanced bioreactor to address this problem. Methods: This bioreactor optimizes the aeration mix using an internal liquid flow guide and multiple propellers. Results: Compared with a conventional bioreactor, it improved the k L a from 367.57 to 875.64 h -1 , an increase of 238.22%. The results show that the oxygen supply capacity of the oxygen-enhanced bioreactor is better than that of the conventional bioreactor. Its oxygenating effect increased the dissolved oxygen in the middle and late stages of fermentation by an average of 20%. The increased viability of Corynebacterium glutamicum LS260 in the mid to late stages of growth resulted in a yield of 185.3 g/L of L-lysine, 74.57% conversion of lysine from glucose, and productivity of 2.57 g/L/h, an increase of 11.0%, 6.01%, and 8.2%, respectively, over a conventional bioreactor. Oxygen vectors can further improve the production performance of lysine strains by increasing the oxygen uptake capacity of microorganisms. We compared the effects of different oxygen vectors on the production of L-lysine from LS260 fermentation and concluded that n-dodecane was the most suitable. Bacterial growth was smoother under these conditions, with a 2.78% increase in bacterial volume, a 6.53% increase in lysine production, and a 5.83% increase in conversion. The different addition times of the oxygen vectors also affected the final yield and conversion, with the addition of oxygen vectors at 0 h, 8 h, 16 h, and 24 h of fermentation increasing the yield by 6.31%, 12.44%, 9.93%, and 7.39%, respectively, compared to fermentation without the addition of oxygen vectors. The conversion rates increased by 5.83%, 8.73%, 7.13%, and 6.13%, respectively. The best results were achieved by adding oxygen vehicles at the 8th hour of fermentation, with a lysine yield of 208.36 g/L and a conversion rate of 83.3%. In addition, n-dodecane significantly reduced the amount of foam produced during fermentation, which is beneficial for fermentation control and equipment. Conclusion: The new oxygen-enhanced bioreactor improves oxygen transfer efficiency, and oxygen vectors enhance the ability of cells to take up oxygen, which effectively solves the problem of insufficient oxygen supply during lysine fermentation. This study provides a new bioreactor and production solution for lysine fermentation.

Gas pressure intensifying oxygen transfer to significantly improving the bio‐oxidation productivity of whole‐cell catalysis

Resolving the formidable barrier of oxygen transferring rate (OTR) in ultrahigh-titer bioconversion/biocatalysis by a sealed-oxygen supply biotechnology (SOS)

In-situ sodium percarbonate assisting and intensifying the aerobic whole-cell catalysis and bio-oxidation of lignocellulosic xylose, glucose and glycerol

Intensification of a Biocatalytic Oxidation under Fine Bubble Aeration in a Rotating Bed Reactor

High‐Pressure Reactor Technology for Aerated Biotransformations

Highly Productive Oxidative Biocatalysis in Continuous Flow by Enhancing the Aqueous Equilibrium Solubility of Oxygen

Putting cells under pressure: a simple and efficient way to enhance the productivity of medium-chain-length polyhydroxyalkanoate in processes with Pseudomonas putida KT2440

Enhancement of interfacial catalysis in a triphase reactor using oxygen nanocarriers

Syntrophic Interactions Within a Butane-Oxidizing Bacterial Consortium Isolated from Puguang Gas Field in China

Boosting Gas Involved Reactions at Nanochannel Reactor with Joint Gas-Solid-Liquid Interfaces and Controlled Wettability.

Oxygenate-based routes regulate syngas conversion over oxide–zeolite bifunctional catalysts

Intensification of Gas–Liquid Mass-Transfer Efficiency by Introducing a Superaerophilic Surface in the Ozonation Process

Improving the Oxygenation Performance of a Cyanobacterial Lipoxygenase by Oxygen Channel Engineering

Modeling and Experimental Validation of Continuous Biocatalytic Oxidation in Two Continuous Stirred Tank Reactors in Series

Critical impact of pressure regulation on carbon dioxide biosynthesis

Effects of Air Pressure Oscillation Amplitude on Oxygen Transfer Rate and Biomass Productivity in a Solid-State Fermenter

Effect of Nitrogen, Air, and Oxygen on the Kinetic Stability of NAD(P)H Oxidase Exposed to a Gas–Liquid Interface

Repurposing Inflatable Packaging Pillows as Bioreactors: a Convenient Synthesis of Glucosone by Whole-Cell Catalysis Under Oxygen

Oxygen Transfer in High Solids Loading and Highly Viscous Lignocellulose Hydrolysates

Productivity enhancement in L-lysine fermentation using oxygen-enhanced bioreactor and oxygen vector

Improvement of Welan Gum Biosynthesis and Transcriptional Analysis of the Genes Responding to Enhanced Oxygen Transfer by Oxygen Vectors in Sphingomonas Sp.