Potential for eco-friendly recovery of rare earth elements from fly ash using carboxylic acids: A comparative study with mineral acids and environmental risk assessment for sustainable fly ash reuse

Ahmed K. Sakr,Sai Praneeth,Mohammed Dardona,Dimitrios Kakaris Porter,Chandra M. Tummala,Preetom K. Roy,Timothy M. Dittrich
DOI: https://doi.org/10.1016/j.cej.2024.158355
IF: 15.1
2024-12-12
Chemical Engineering Journal
Abstract:The increased reliance on rare-earth elements (REEs) in many technologies while primary resources remain limited has compelled researchers worldwide to find alternate and unconventional sources. Fly ash is one promising secondary source and this work investigates the mechanisms controlling REE extracting from fly ash and compares traditional mineral acids with alternative low molecular weight carboxylic acids. The main goal of exploring the use of carboxylic acids is that they are potentially more environmentally friendly compared with mineral acids. Carboxylic acids may leach significant REEs without damaging the mineralogic structure of fly ash and may provide a zero-waste opportunity by using leached fly ash in another application. Carboxylic acids can be monocarboxylic (formic acid and pyruvic acid) or dicarboxylic (tartaric acid) and leaching performance was compared with nitric, hydrochloric, and sulfuric acids by varying time, concentrations, and solid-to-liquid ratios. Hydrochloric and nitric acids were the most efficient, dissolving 84.5 % and 77.6 % or total leachable REEs; however, carboxylic acids demonstrate notable leaching efficiency with pyruvic acid (74.1 %), formic acid (68.8 %), and tartaric acid (66.4 %). The SEM-EDS data illustrate that organic acids have minimal impact on the structure of the acidified fly ash. Furthermore, the acidified fly ash was tested for its environmental leaching behavior under various USEPA tests showing that chromium concentrations leached from raw and acidified fly ash could exceed drinking water limits, indicating possible contamination to surrounding water bodies. Chromium leaching as a function of pH follows a typical amphoteric pattern with minimal leaching at neutral pH (6–7) and the highest concentration of 2.9 mg L −1 at a pH range of 1–3 making it non-hazardous at all levels of pH.
engineering, chemical, environmental
What problem does this paper attempt to address?