Abstract:Fe-bearing salt and minerals are common reagents used in activating peroxymonosulfate (PMS) for Fenton-like oxidation in wastewater treatment. Fe-bearing reagents are used in mass production, which generate abundant Fe-bearing waste sludge in the absence of a reductant for Fe3+/Fe2+ cycling. Herein, a novel Fe/S-bearing mineral, erdite, was synthesized with a one-step hydrothermal route. The material exerted an Fe/S synergetic effect for p-nitrophenol degradation upon PMS activation and showed a one-dimensional structure similar to that of (FeS2)nn−. It contained short rods with diameters of 100 nm and lengths ranging from 200 to 400 nm. It grew radically to 0.8–2 μm in length upon the addition of MnO2. Ps-0.5, prepared by adding MnO2 in an Mn/Fe molar ratio of 0.5, showed optimal efficiency in removing approximately 99.4% of p-nitrophenol upon PMS activation. Only 3.3% of p-nitrophenol was removed without MnO2. The efficiency of p-nitrophenol removal through Ps-0.5 activation was higher than that through FeSO4, nanoscale zero-valent iron (nZVI), CuFeS2, and MnSO4 activation. The formed erdite rods were spontaneously hydrolyzed to Fe/S-bearing flocs, in which an electron was used by structural S to reduce Fe3+ to Fe2+ upon PMS activation. The reduction resulted in a high p-nitrophenol removal rate. This study provided new insight into the development of an effective PMS activator in wastewater treatment.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop a new type of iron/sulfur - bearing mineral, erdite nanorods, for the efficient degradation of p - nitrophenol during the peroxymonosulfate (PMS) activation process, so as to improve the efficiency of wastewater treatment. Specifically, the research aims to: 1. **Synthesize new materials**: Prepare erdite nanorods with a unique one - dimensional structure similar to \((\text{FeS}_2)_{nn}^-\) by a one - step hydrothermal method. 2. **Optimize the PMS activation effect**: Explore the influence of different molar ratios of MnO₂ on the growth of erdite nanorods and the PMS activation effect, and determine the optimal Mn/Fe molar ratio. 3. **Improve the degradation efficiency**: Verify the high - efficiency performance of erdite nanorods during the PMS activation process, especially for the removal efficiency of refractory organic substances such as p - nitrophenol. 4. **Reduce sludge production**: Study how erdite nanorods reduce the production of sludge during the PMS activation process by continuously reducing Fe³⁺ to Fe²⁺, thereby reducing the cost of wastewater treatment. ### Key problems and solutions 1. **Limitations of the traditional Fenton oxidation method**: - **Narrow pH range**: The traditional Fenton oxidation method needs to be carried out under the condition of pH < 3, which requires additional acid to adjust the pH value of wastewater. - **Large amount of iron sludge generation**: The large - scale use of iron reagents leads to the generation of iron sludge, increasing the cost of solid waste treatment. 2. **Advantages of the new erdite nanorods**: - **Efficient activation under neutral pH conditions**: Erdite nanorods can still efficiently activate PMS under near - neutral pH conditions, which is suitable for actual wastewater treatment. - **Reduce iron sludge generation**: Reduce Fe³⁺ to Fe²⁺ through S²⁻ in the structure, maintain the Fe²⁺/Fe³⁺ cycle, and reduce the generation of iron sludge. - **High degradation efficiency**: The experimental results show that Ps - 0.5 (the sample with a Mn/Fe molar ratio of 0.5) has a removal rate of up to 99.4% for p - nitrophenol during the PMS activation process, which is significantly better than other common activators. ### Experimental methods and results - **Material synthesis**: Prepare erdite nanorods with different Mn/Fe molar ratios by the hydrothermal method. - **Characterization means**: Characterize the synthesized materials by means of SEM, XRD, XPS, etc. - **PMS activation experiment**: Test the degradation effect of different samples on p - nitrophenol through the Fenton - like reaction. - **Free radical analysis**: Use EPR technology to detect the generation of free radicals and verify the mechanism of erdite nanorods in PMS activation. ### Conclusion The research has successfully synthesized erdite nanorods with high activity. Especially when the Mn/Fe molar ratio is 0.5, it shows the optimal PMS activation effect. This material not only efficiently degrades p - nitrophenol under neutral pH conditions, but also significantly reduces the generation of iron sludge, providing new ideas and technical support for actual wastewater treatment.

Synthesis of novel erdite nanorods for the activation of peroxymonosulfate during p-nitrophenol wastewater treatment

Upcycling of groundwater treatment sludge to an erdite nanorod as a highly effienct activation agent of peroxymonosulfate for wastewater treatment

Bifunctional erdite rods as an effective flocculant and catalyst in electro-Fenton systems

Stable Incorporation of MnOx Quantum Dots into N-doped Hollow Carbon: A Synergistic Peroxymonosulfate Activator for Enhanced Removal of Bisphenol A

ZIF-8 Derived Fe‒N Coordination Moieties Anchored Carbon Nanocubes for Efficient Peroxymonosulfate Activation Via Non-Radical Pathways: Role of FeNx Sites.

Engineering single-atom Fe-Pyridine N4 sites to boost peroxymonosulfate activation for antibiotic degradation in a wide pH range

Fe-Mn oxycarbide anchored on N-doped carbon for enhanced Fenton-like catalysis: Importance of high-valent metal-oxo species and singlet oxygen

Highly efficient catalyst of Crednerite CuMnO2 for PMS activation: Synthesis, performance and mechanism

Clinoptilolite mediated activation of peroxymonosulfate through spherical dispersion and oriented array of NiFe2O4: Upgrading synergy and performance

A New Insight into the Mechanism in Fe3O4@CuO/PMS System with Low Oxidant Dosage

Iron-loading N and S heteroatom doped porous carbon derived from chitosan and CdS- Tetrahymena thermophila for peroxymonosulfate activation

Iron nanoparticles encapsulated within nitrogen and sulfur co-doped magnetic porous carbon as an efficient peroxymonosulfate activator to degrade 1-naphthol

Facile tuning Non-radical/Radical oxidation by nitrogen doping on Fe-S doped carbonaceous catalysts for peroxymonosulfate activation

Peroxymonosulfate activation by Ni-Fe (hydr)oxides through radical and nonradical pathways for efficient trichloroethylene degradation

Fe and Zn co-doped carbon nanoparticles as peroxymonosulfate activator for efficient 2,4-dichorophenol degradation

Application of 3D hierarchical porous NiCo-spinel nanosheet array for enhancement of synergistic activation of peroxymonosulfate: Degradation, Intermediates, mechanism and degradation pathway of tetracycline

Constructing carbon nitride embedded Fe 0 for efficient activation of peroxymonosulfate towards organic pollutants degradation in water

Peroxymonosulfate activation by iron-cobalt bimetallic phosphide modified nickel foam for efficient dye degradation

Enhanced peroxymonosulfate activation by δ-MnO 2 nanocatalyst enriched with oxygen vacancies for phenolic pollutants polymerization

The enhanced peroxymonosulfate activation ability and mechanism on low-coordinated Fe-N 3 single sites for organic pollutant degradation in wastewater

Sulfur doped Porous Carbon Sheets Embedded with Rich Iron Sites for the 1O2 Dominated Peroxymonosulfate Activation