Multi-Frequency Noise Reduction Method for Underwater Radiated Noise of Autonomous Underwater Vehicles

Beibei Mao,Hua Yang,Wenbo Li,Xiaoyu Zhu,Yuxuan Zheng

DOI: https://doi.org/10.3390/jmse12050705

IF: 2.744

2024-04-26

Journal of Marine Science and Engineering

Abstract:The multi-frequency noisy vibration of an autonomous underwater vehicle (AUV) is a significant factor affecting the performance of shear probes mounted on the head of AUVs. Many efforts have been made to suppress mechanical radiation noise; however, conventional noise reduction methods have their limitations, such as mode mixing. In order to extract thorough information from the aliasing modes and achieve multi-frequency mode targeted correction, a multi-frequency noise reduction method is proposed, based on secondary decomposition and the multi-mode coherence correction algorithm. Weak impulses in aliasing shear mode are enhanced, and mixing frequencies are isolated for thorough decomposition. Noisy mechanical vibrations in the shear modes are eliminated with the use of the acceleration modes along the identical central frequency series. The denoised modes are used to reconstruct the cleaned shear signal, and the updated spectra are aligned with the standard Nasmyth spectrum. Compared with the raw profiles, the variation in the dissipation rate estimated from the corrected shear is reduced by more than an order of magnitude.

oceanography,engineering, marine, ocean

What problem does this paper attempt to address?

This paper attempts to solve the problem of the influence of multi - frequency noise generated during the operation of an autonomous underwater vehicle (AUV) on the performance of the shear probe installed on its head. Specifically, the paper proposes a multi - frequency noise suppression method based on quadratic decomposition and multi - mode coherent correction algorithm, aiming to extract complete information from aliased modes and achieve the target correction of multi - frequency modes. By enhancing the weak pulses in the aliased shear modes and isolating the mixed frequencies to achieve complete decomposition, this method can eliminate the mechanical vibration noise in the shear modes, use the acceleration modes with the same central frequency series to eliminate noise, and reconstruct a clean shear signal, making the updated spectral line align with the standard Nasmyth spectral line. Compared with the original data, the dissipation rate change estimated by the shear signal corrected by this method is reduced by more than an order of magnitude.

The main contribution of this paper is to provide an effective method to reduce the multi - frequency self - noise generated during AUV movement, which is crucial for subsequent turbulence property analysis. Traditional noise suppression methods have limitations such as mode mixing, and the multi - frequency noise suppression method proposed in this paper overcomes these limitations by introducing quadratic decomposition technology and improves the accuracy of signal processing.