Abstract:Fe3O4 nanoparticles were synthesized by an eco‐friendly process and were used as adsorbents to remove methylene blue from aqueous solutions. The effects of pH, adsorbent dose, kinetics, isotherm, and thermodynamics parameters were studied. The adsorption systems were found to be compatible with the Langmuir isotherm model and the pseudo‐second‐order kinetic model. The magnetic properties of the adsorbents allow them to be separated from wastewater by simple separation. For the optimization of the adsorption variables, response surface methodology was successfully applied, and optimum values of these variables were determined with a quadratic model equation. Water coloring has the properties of resistance to mutagenic, toxic, aggressive, carcinogenic, destructive, strong light and unstable oxidation and air pollution and has serious effects on environmental systems and human health. Because of its severe toxicity, methylene blue (MB) can cause cancer, mutagenesis, and teratogenic consequences in people as well as enter the food chain. The main objective of this investigation is to study the modeling and the optimization parameters of MB adsorption using a low‐cost adsorbent Fe3O4. The parameters evaluated for adsorption are the adsorbent dosage, pH, contact time, and temperature using the response surface methodology. The principal variables affecting MB removal were pH (3–11), catalyst dosage (0.01–0.3 g), contact duration (10–180 min), and temperature (25–55 °C). To select an experimental domain, a preliminary study was performed first. The results showed that at pH 10, 1.4 g L−1 Fe3O4‐nanoparticles (NPs) had the highest removal efficiency of cationic dye MB (20 ppm) from aqueous solutions by batch adsorption technique. The pseudo‐second‐order (PSO) kinetic models and the Langmuir isotherm provided the best fit for the adoption of MB. The adsorption process was exothermic and spontaneous, according to thermodynamics studies. To determine the effect of the investigated variables and their interaction on the adsorption process, a Box–Behnken design was used. A second‐order polynomial equation was used to model the experimental results. The experimental findings were consistent with the suggested model as demonstrated by the high value of the determination coefficient. The performance of the model equation verified the experimental observation with just a slight divergence, and the values acquired from the experiment and model predictions were found to be in suitable agreement. According to the numerical optimization, 98.61 % is the optimal elimination efficiency for MB adsorption. These results suggest that an adsorption process utilizing Fe3O4 NPs is efficient in environmental remediation.

Numerical parametric optimization with desirability functions for methylene blue dye removal by sunflower seed pericarp activated carbon

Mesoporous Activated Carbon from Sunflower (Helianthus annuus) Seed Pericarp for Crystal Violet Dye Removal: Numerical Desirability Optimization and Mechanism Study

Numerical desirability function for adsorption of methylene blue dye by sulfonated pomegranate peel biochar: Modeling, kinetic, isotherm, thermodynamic, and mechanism study

Removal of methylene blue from coloured effluents by adsorption onto SBA-15

Box-Behnken design with desirability function for methylene blue dye adsorption by microporous activated carbon from pomegranate peel using microwave assisted K2CO3 activation

Blended Nephelium lappaceum and Durio zibethinus wastes for activated carbon production via microwave-ZnCl2 activation: optimization for methylene blue dye removal

Tropical fruit wastes including durian seeds and rambutan peels as a precursor for producing activated carbon using H3PO4-assisted microwave method: RSM-BBD optimization and mechanism for methylene blue dye adsorption

Enhancing methylene blue removal: synthesis, characterization, and performance evaluation of chemically activated carbon adsorbents

Adsorption of cationic dye onto Raphanus seeds: optimization, adsorption kinetics, thermodynamic studies

Adsorptive decolouration of anionic dye from water by goat dropping activated carbon prepared via microwave-assisted H3PO4 activation: process optimization using response surface methodology, isotherm and kinetics modelling

High surface area and mesoporous activated carbon from KOH-activated dragon fruit peels for methylene blue dye adsorption: Optimization and mechanism study

Desirability function and Box-Behnken design optimization for crystal violet dye adsorption by palm date stone activated carbon

Effective Removal of Methylene Blue Dye Using Low-Cost Essential Oil Industry Waste: Novel Hybrid Design Approach, Kinetic and Thermodynamic Evaluation

Synthesis and characterization of modified activated carbon (MgO/AC) for methylene blue adsorption: optimization, equilibrium isotherm and kinetic studies

Optimized removal of methylene blue using chemically activated and thermally modified Opuntia ficus-indica bioadsorbent: a response surface methodology approach

Optimization of hydrothermal synthesis conditions of Bidens pilosa-derived NiFe2O4@AC for dye adsorption using response surface methodology and Box-Behnken design

Methylene Blue Adsorption by Fe3O4 Nanoparticles: An Optimization Study Using Response Surface Methodology

Preparation of a highly functionalized activated carbon from waste third-monomer pressure filter liquid for removal of methylene blue in aqueous solution

Methylene Blue Adsorption Using Boric Acid Functionalized Activated Carbon: Kinetics, Isothermal, and Thermodynamic Studies

Optimized removal process and tailored adsorption mechanism of crystal violet and methylene blue dyes by activated carbon derived from mixed orange peel and watermelon rind using microwave-induced ZnCl2 activation

High-Surface-Area-Activated Carbon Derived from Mango Peels and Seeds Wastes via Microwave-Induced ZnCl2 Activation for Adsorption of Methylene Blue Dye Molecules: Statistical Optimization and Mechanism