Abstract:Orbital Angular Momentum (OAM) lasers have potential demand in many applications such as large capacity communication systems, laser processing, particle manipulation and quantum optics. OAM mode femtosecond fiber laser has become the research focus with the advantages of simple structure, low cost and high peak power. The current OAM mode femtosecond fiber lasers have made breakthroughs in the repetition frequency, pulse width, spectrum width and other key parameters, but it is difficult to achieve good overall performance. Besides, the repetition rate is currently in tens of MHz. In this paper, a large-bandwidth mode coupler is made based on the mode phase matching principle. Among them, the first order mode coupler with 3dB polarization dependent loss is made by the technology of strong fused biconical taper, and the second order mode coupler with 0.3dB polarization dependent loss is made by the technology of weak fused biconical taper. Combined with the nonlinear polarization rotation mode-locking mechanism, OAM mode femtosecond fiber lasers with over 100 MHZ repetition rate are built. The achievement of the key parameters is attributed to the selection of dispersion shifted fibers that can accurately adjust intracavity dispersion. Compared to traditional dispersion compensation fibers (DCF), the group velocity dispersion is reduced by an order of magnitude, so it can better adjust intracavity dispersion to achieve the indicators of large spectral bandwidth and narrow pulse width. In addition, the diameter of the fiber is 8μm, which is the same as that of a single mode fiber. Compared to DCF, the fusion loss can be ignored, so only a shorter gain Erbium-doped fiber is required that ensure a shorter overall cavity length and achieve high repetition frequency. The experimental results show that the first order OAM mode fiber laser has 113.6 MHz repetition rate, 98 fs half-height full pulse width, and 101nm 10-dB bandwidth. Second-order OAM mode fiber laser has 114.9 MHz repetition rate, 60 fs half-height full pulse width, and 100nm 10-dB bandwidth. Compared with the reported schemes, our scheme has better performance in key parameters such as repetition rate, pulse width and spectral width. We believe that the OAM mode fiber laser with good over performance is expected to be more widely used in OAM communication, particle manipulation and other research fields.

108.96 nm Broadband Generation of Second-Order OAM Beam Using an Angular Modulated Cascading LPFG

Efficient generation of Second-order beam Based on angular modulated Long-period fiber grating

Simultaneous Efficient Excitation of Multiple Higher-Order OAM Modes Using a Single Long-Period Fiber Grating

Simultaneous generation of first- to fourth-order OAM modes based on a cascaded preset-twist long-period fiber grating

Full C- and L-band covered second-order OAM mode generator based on a thinned helical long-period fiber grating

Broadband generation of multiple high-order OAM modes in ring-core fibers using multi-pitch chirped long-period fiber gratings

All-fiber fourth-order OAM mode generation employing a long period fiber grating written by preset twist

Ultra-Wideband OAM Mode Generator Based on a Helical Grating Written in a Graded-Index Few-Mode Fiber

Ultra-broadband multi-channel orbital angular momentum mode generator using a helical long-period grating pair

Bandwidth optimization of cascaded long-period gratings for broadband mode conversion over 1.0-2.2 µm waveband

On-demand flat-top wideband OAM mode converter based on a cladding-etched helical fiber grating

High-Power Orbital Angular Momentum Beam Generation Using Adaptive Control System Based on Mode Selective Photonic Lantern

Toward Generation of Mid-Infrared Orbital Angular Momentum Beams by Tailoring Four-Wave Mixing in Chalcogenide Photonic Crystal Fiber

Bi-directional high-order orbital angular momentum mode generation using gratings in high numerical aperture fiber

Third-order orbital angular momentum pulse generation from a passively Q-switched fiber laser

Cylindrical vector beam generation based on arc-induced long-period gratings in few-mode fiber

Beyond two-octave coherent OAM supercontinuum generation in air-core Ge-doped ring fiber

Orbital angular momentum mode femtosecond fiber laser with over 100 MHz repetition rate

Stable Generation of Orbital Angular Momentum Mode with an All-Fiber Laser

Wavelength Tunable Orbital Angular Momentum Mode Convertor based on Helical Long-Period Grating Inscribed in Six-Mode Fiber using CO 2 -Laser

All-fiber mode converter based on long-period fiber gratings written in few-mode fiber