Abstract:Energy consumption of electronic devices continues to reduce dramatically, enabling the ambient energy harvesting devices as a solution for powering the wireless sensor nodes (WSNs), micro-electromechanical systems and portable electronics. Over the years, vibration-based piezoelectric harvesting has been emerged as a potential technology to recharge/replace chemical batteries in WSNs. A conventional linear piezoelectric energy harvester (PEH) cannot meet the requirement of broadband vibration resources as it generates useful power only in a narrow bandwidth near the resonant frequency. Several techniques such as passive/active resonance tuning, array of harvester beams, nonlinear designs and multi-degree-of-freedom energy harvesters have been investigated. This paper proposes a generalized multi-mode PEH (MPEH) accompanied with analytical modeling, which generates multiple close peaks of voltage output from low amplitude broadband and low frequency ambient vibration sources. The proposed MPEH comprises of a main cantilevered beam bonded with a patch of piezoelectric layer and attached with multiple branches with tip masses at their free ends. The useful bandwidth and the number of peaks for the MPEH could be tuned conveniently by varying multiple branches and tip masses. The proposed MPEH offers high design flexibility in tuning geometric parameters for achieving target frequencies and generates high power density. The mathematical modeling of generalized MPEH under transverse harmonic base vibrations is presented and the dynamic equations of the multi-modal harvester system are obtained following the Lagrangian method. The derived distributed parametric model of MPEH is more accurate than lumped parametric models of PEHS presented in the literature. The accuracy of the proposed analytical model is validated by two examples with numerical simulation and experimental results. It is shown that the multi-mode PEH has potential to generate sufficient power output from broadband vibration sources to sustain low-power electronic devices. (C) 2019 Elsevier Ltd. All rights reserved.

A Dynamic Simulation of a Piezoelectric Energy-Harvesting System Integrated with a Closed-Loop Voltage Source Converter for Sustainable Power Generation

Analytical Modeling and Validation of Multi-Mode Piezoelectric Energy Harvester

Theoretical Study of a Two-Degree-of-Freedom Piezoelectric Energy Harvester under Concurrent Aeroelastic and Base Excitation

Compressive-mode Piezoelectric Energy Harvesting in Translational and Rotational Systems.

The dynamic characteristics of harvesting energy from mechanical vibration via piezoelectric conversion

Theoretical and Experimental Investigation of a Bi-Stable Piezoelectric Energy Harvester Incorporating Fluid-Induced Vibration

Harnessing Multi-Stable Piezoelectric Systems for Enhanced Wind Energy Harvesting

Modeling and Analysis of Upright Piezoelectric Energy Harvester under Aerodynamic Vortex-induced Vibration

Design and analysis of the piezoelectric-electromagnetic energy harvester based on magnetically coupled structures

Dynamic Modeling and Experimental Validation of an Impact-Driven Piezoelectric Energy Harvester in Magnetic Field

Vibration Energy Conversion Power Supply Based on the Piezoelectric Thin Film Planar Array

Multi-branch Sandwich Piezoelectric Energy Harvester: Mathematical Modeling and Validation

System-Level Coupled Modeling of Piezoelectric Vibration Energy Harvesting Systems by Joint Finite Element and Circuit Analysis

Designed Simulation and Experiment of a Piezoelectric Energy Harvesting System Based on Vortex-Induced Vibration

Piezoelectric energy harvesting from hybrid vibrations

An Innovative V-shaped Piezoelectric Energy Harvester for Wind Energy Based on the Fully Fluid-Solid-electric Coupling

Model and Dynamic Analysis of the Electro-mechanical Coupling System of Piezoelectric Vibration Energy Harvesters

A Contactless Coupled Pendulum and Piezoelectric Wave Energy Harvester: Model and Experiment

Electromechanical Modeling and Experimental Analysis of a Compression-Based Piezoelectric Vibration Energy Harvester

Distributed-parameter modeling and dynamic analysis of rotational compressive-mode energy harvesters

Multimodal piezoelectric wind energy harvester for aerospace applications