Abstract:An optimal solution to the task-space tracking problem using a non-redundant manipulator is proposed. This is a recurring occurrence in automated manufacturing settings, e.g. welding, deburring, painting, or quality control inspections. Given a pre-defined path for the end-effector to follow, there may not exist a joint-space continuous solution for task-space tracking when the non-linear manipulator kinematics and collision avoidance with obstacles in the workcell are considered. This introduces undesirable manipulator reconfigurations where the end-effector is required to deviate temporarily from the pre-defined path. The unwanted motion results in pausing task-space tracking, often incurring not only ineffective time and energy demands but potentially compromising the quality of the task at hand due to the additional discontinuities. An algorithm is proposed that provides a globally optimal perspective to the choice of suitable joint-space connected segments so that the minimum number of manipulator reconfigurations during task-space tracking is guaranteed. By carefully selecting the inverse kinematic solutions, all sequences ensuring minimum reconfigurability are proven collected by Dynamic Programming. Moreover, a faster greedy strategy is suggested to increase the computational efficiency of the tracker whilst still preserving global optimality and completeness. The effectiveness of the proposed algorithm is validated against traditional sampling-based solvers in simulation and illustrated on challenging real-world tracking experimentation with a Universal Robotics manipulator and a curved-surface object, depicted also in an accompanying video. An open-source implementation has also been provided for the benefit of the robotics community.

An Inverse Kinematics Algorithm With Smooth Task Switching for Redundant Robots

Iteratively Successive Projection: A Novel Continuous Approach for the Task-Based Control of Redundant Robots.

Optimal Task-Space Tracking with Minimum Manipulator Reconfiguration

A Joint Physical Constraints Avoidance Method for Inverse Kinematics Problem of Redundant Humanoid Manipulator

Visualized Trajectory Planning of Flexible Redundant Robotic Arm Using A Novel Hybrid Algorithm

Real-time optimized inverse kinematics of redundant robots under inequality constraints

An efficient approach for inverse kinematics and redundancy resolution of spatial redundant robots for cluttered environment

Kinetostatic Optimization for Kinematic Redundancy Planning of Nimbl'Bot Robot

Prioritized Multitask Flow Optimization of Redundant Hydraulic Manipulator

An Efficient Inverse Kinematic Algorithm for a PUMA560-Structured Robot Manipulator

A Spatial Path Following Method for Hyper-Redundant Manipulators by Step-by-Step Search and Calculating

A Dynamic Programming Framework for Optimal Planning of Redundant Robots Along Prescribed Paths With Kineto-Dynamic Constraints

Optimizing Redundant Robot Kinematics and Motion Planning via Advanced D-H Analysis and Enhanced Artificial Potential Fields

Beyond Jacobian-based tasks: Extended set-based tasks for multi-task execution and prioritization

Toward coordinated planning and hierarchical optimization control for highly redundant mobile manipulator

Dynamically Efficient Kinematics for Hyper-Redundant Manipulators

Combining closed-form and numerical solutions for the inverse kinematics of six-degrees-of-freedom collaborative handling robot

Dynamic modulation of multi-task priority for controlling redundancy insufficient robots

A Bi-Level Optimization Approach to Joint Trajectory Optimization for Redundant Manipulators

Inverse kinematics and planning/control co-design method of redundant manipulator for precision operation: Design and experiments

Efficient and Scalable Inverse Kinematics for Continuum Robots