Abstract:In this work, a unified phase field theory for two coupled fracture types is proposed. Compared with the existing unified phase field theory for single fracture type, it considers the coupling behavior between different fracture types and is consistent with the single fracture type theory when one type of fracture is suppressed. Based on a new form of energy decomposition, that is, the strain energy is decomposed into deviatoric, tensile volumetric and compressive volumetric parts, and specifying the driving energy for each fracture type, a double phase-field model for coupled spall and adiabatic shear banding, which are two kinds of typical dynamic ductile fracture, is realized with the proposed unified phase field theory for two coupled fracture types. This coupled model can be used to predict the potential spall and adiabatic shear banding failures in ductile metals under dynamic loading, revealing the corresponding fracture types under different loadings without any additional criteria. The entire damage and fracture evolution (that is, from damage evolution, through crack expansion, and to fragmentation) are captured with this unified phase-field modeling framework. In addition, as an advantage of the double phase-field model, the complex multicrack distributions of spall and adiabatic shear bands in ductile metals can be presented with the proposed model. Based on these features, the expanding characteristics of complex cracks in metallic expanding shells are numerically studied. It is found that, if multilayer spall occurs, the specimen tends to fracture into three layers, that is, a complete spall layer, fragmentations in multilayer areas, and the main body, which is consistent with the experimental observations under certain conditions and is not the regular multiple layers predicted by the multilayer spall theory with ideal material assumption. For multiple adiabatic shear bands (ASBs) in the shell, the spiral patterns of ASBs' distributions, the initial positions, and the propagating path are clarified for the collapsed and expanding shells. The collapsed shell tends to form a single-direction spiral pattern whereas the expanding shell tends to form a double-direction spiral pattern. In addition to the inner surface, the intersection points of two ASBs can initiate cracks, and, as the intersection points have the chance of being distributed on the outer surface, the expanding shell has a greater potential to initiate a crack on the outer surface than the collapsed shell. The propagating path will be deflected after interactions of two ASBs, and the quantitative relationship between the deflection angle and the stress state before the interactions is given, which explains why the deflection angle is significantly larger in the collapsed shell compared with that in the expanding shell. Based on the above results and analysis, four typical stages of fractures in the expanding shell under internal explosive loading are identified.

A rate-dependent phase-field model for dynamic shear band formation in strength-like and toughness-like modes

A Unified Phase Field Damage Model for Modeling the Brittle-Ductile Dynamic Failure Mode Transition in Metals

Phase-field modeling of spontaneous shear bands in collapsing thick-walled cylinders

A phase field model for ductile fracture considering the strain rate, stress triaxiality and Lode angle parameter

Phase-field modeling of coupled spall and adiabatic shear banding and simulation of complex cracks in ductile metals

A Three-Dimensional Coupled Thermo-Elastic-plastic Phase Field Model for the Brittle-Ductile Failure Mode Transition of Metals

Two-dimensional evolution of temperature and deformation fields during dynamic shear banding: In-situ experiments and modeling

A Generalized Ductile Phase Field Model for Fracture Behavior of Three-Dimensional Metal Structures

A Thermo-Elastic-plastic Phase-Field Model for Simulating the Evolution and Transition of Adiabatic Shear Band. Part I. Theory and Model Calibration

A Rate-Dependent Phase-Field Framework for the Dynamic Failure of Quasi-Brittle Materials

A Phase-Field Model for Mixed-Mode Fracture Based on a Unified Tensile Fracture Criterion

A Phase-Field Damage Model with Micro Inertia Effect for the Dynamic Fracture of Quasi-Brittle Solids

A Thermo-Mechanical Phase-Field Model for Mixed-Mode Fracture and Its Application in Rock-Like Materials

A thermodynamically consistent phase field model for mixed-mode fracture in rock-like materials

Study of the Mixed Tensile-Shear Ductile Fracture of Impulsively Loaded Metal Plates by Developing a Phase-Field Fracture Model with Stress Triaxiality and Lode Parameter Dependence

A Unified Phase-Field Theory for the Mechanics of Damage and Quasi-Brittle Failure

Phase field modeling of ductile fracture with isotropic hardening and radius return method

A novel micromechanics-enhanced phase-field model for frictional damage and fracture of quasi-brittle geomaterials

Phase Field Modeling of Crack Growth with Viscoplasticity

Modeling of Both Tensional-Shear and Compressive-Shear Fractures by a Unified Phase-Field Model

A Gradient-Enhanced Plasticity Based Phase-Field Model for Ductile Fracture Simulations