Abstract:BackgroundOptical Coherence Tomography (OCT) is a noninvasive imaging technique that compiles successive interferometric signals into a tomographic image. Although the capacity of OCT to image dental structures has been verified, the anisotropic nature of teeth and gingival tissue may limit the resolution of conventional OCT.ObjectiveThe objective of this study was to compare the imaging characteristics of dental caries using polarization-sensitive (ps-OCT) and conventional OCT.Study designFive teeth with no evidence of caries and 4 teeth with dentinal caries were imaged using 2 prototype OCT systems. The conventional OCT system consisted of an autocorrelator scanning interferometer using a 1310-nm (60 nm spectral bandwidth) 14-mW superluminescent diode (SLD) light source. The second system was a prototype ps-OCT using a 2-mW, 1300-nm SLD with a spectral bandwidth of 40 nm. Light from the SLD first passed a vertical polarizer and was then separated by a beamsplitter. In the sample arm, light was circularly polarized with a quarter waveplate in which the fast axis was oriented at 45 degrees with respect to the vertical direction. Light returning from both the sample and the reference arms was again separated by a polarizing beamsplitter. The vertically and horizontally polarized signals were then detected in 2 channels and images were reconstructed by combining the signals.ResultsConclusionsOur ps-OCT dental prototype provides higher-resolution images and should introduce a precision of measurement that is not possible with current methods. Ps-OCT is relatively inexpensive, is noninvasive, and can produce 3-dimensional images of dental caries. BackgroundOptical Coherence Tomography (OCT) is a noninvasive imaging technique that compiles successive interferometric signals into a tomographic image. Although the capacity of OCT to image dental structures has been verified, the anisotropic nature of teeth and gingival tissue may limit the resolution of conventional OCT. Optical Coherence Tomography (OCT) is a noninvasive imaging technique that compiles successive interferometric signals into a tomographic image. Although the capacity of OCT to image dental structures has been verified, the anisotropic nature of teeth and gingival tissue may limit the resolution of conventional OCT. ObjectiveThe objective of this study was to compare the imaging characteristics of dental caries using polarization-sensitive (ps-OCT) and conventional OCT. The objective of this study was to compare the imaging characteristics of dental caries using polarization-sensitive (ps-OCT) and conventional OCT. Study designFive teeth with no evidence of caries and 4 teeth with dentinal caries were imaged using 2 prototype OCT systems. The conventional OCT system consisted of an autocorrelator scanning interferometer using a 1310-nm (60 nm spectral bandwidth) 14-mW superluminescent diode (SLD) light source. The second system was a prototype ps-OCT using a 2-mW, 1300-nm SLD with a spectral bandwidth of 40 nm. Light from the SLD first passed a vertical polarizer and was then separated by a beamsplitter. In the sample arm, light was circularly polarized with a quarter waveplate in which the fast axis was oriented at 45 degrees with respect to the vertical direction. Light returning from both the sample and the reference arms was again separated by a polarizing beamsplitter. The vertically and horizontally polarized signals were then detected in 2 channels and images were reconstructed by combining the signals. Five teeth with no evidence of caries and 4 teeth with dentinal caries were imaged using 2 prototype OCT systems. The conventional OCT system consisted of an autocorrelator scanning interferometer using a 1310-nm (60 nm spectral bandwidth) 14-mW superluminescent diode (SLD) light source. The second system was a prototype ps-OCT using a 2-mW, 1300-nm SLD with a spectral bandwidth of 40 nm. Light from the SLD first passed a vertical polarizer and was then separated by a beamsplitter. In the sample arm, light was circularly polarized with a quarter waveplate in which the fast axis was oriented at 45 degrees with respect to the vertical direction. Light returning from both the sample and the reference arms was again separated by a polarizing beamsplitter. The vertically and horizontally polarized signals were then detected in 2 channels and images were reconstructed by combining the signals. Results ConclusionsOur ps-OCT dental prototype provides higher-resolution images and should introduce a precision of measurement that is not possible with current methods. Ps-OCT is relatively inexpensive, is noninvasive, and can produce 3-dimensional images of dental caries. Our ps-OCT dental prototype provides higher-resolution images and should introduce a precision of measurement that is not possible with current methods. Ps-OCT is relatively inexpensive, is noninvasive, and can produce 3-dimensional images of dental caries.

Optical clearing agents based on metallic and dielectric nanoparticles for caries diagnostic by optical coherence tomography

Exploiting Nanomaterials for Optical Coherence Tomography and Photoacoustic Imaging in Nanodentistry

Research progress on early caries detection with optical coherence tomography

In situ gold nanoparticles formation: contrast agent for dental optical coherence tomography

Analysis of enamel/restoration interface submitted cariogenic challenge and fluoride release

Photoacoustic imaging of occlusal incipient caries in the visible and near-infrared range

Using Antimicrobial Photodynamic Therapy with Ultrasound Devices and Bioactive Glasses as a Combined Approach for Treating Dentin Caries Lesions

Novel Experimental In-Office Bleaching Gels Containing Co-Doped Titanium Dioxide Nanoparticles

Evaluation of the cytotoxicity of new formulations of cariostatic agents containing nano silver fluoride: an in vitro study

Synthesis and Characterization of Titanium Oxide Nanoparticles with a Novel Biogenic Process for Dental Application

A depth-resolved quantitative evaluation method for non-carious cervical lesions treatment with optical coherence tomography

Evaluation of the Preventive Effect of Composites Containing Silver and TiO2 Nanoparticles on Demineralization around Orthodontic Brackets

Remineralizing Effect of Nanofilled Glass Ionomer Combined with Titanium Dioxide Nanoparticle and Nanohydroxyapatite in Root Caries-like Lesions

Adjunctive therapies for in vitro carious lesions: Antimicrobial activity, activation of dentin metalloproteinases and effects on dental pulp cells

Enhancement of mineral density and mechanical properties in root caries treated with silver diammine fluoride and glass ionomer cement, with emphasis on silver ion distribution

Dental Caries Management with Antibacterial Silver-Doped Prussian Blue Hydrogel by the Combined Effects of Photothermal Response and Ion Discharge

Exploiting optical coherence tomography to evaluate wear in spiral dental polishing systems

Characterization of dental caries using Optical Coherence Tomography

Synthesis and characterization of nanoparticulate niobium- and zinc-doped bioglass-ceramic/chitosan hybrids for dental applications

Cross-sectional visual comparison of remineralization efficacy of various agents on early smooth surface caries of primary teeth with swept source optical coherence tomography

Electron Microscope Scanning, and Antibacterial Activity of Tio2 Nanoparticles on pathogenic strains of Staphylococcus aureus and Escherichia coli