Abstract:Accurate information regarding the weight of vehicle loads plays a significant role in maintaining the structural health of bridges. However, the only method currently available for ascertaining the weight of loads is the bridge weigh-in-motion (BWIM) system, which is not widely used because of the high cost of the large device involved. There is therefore a need to develop an effective, low-cost technology to ascertain vehicle loads in relation to spatiotemporal load distribution on long-span bridges. This paper proposes a non-contact vehicle identification methodology to distinguish a vehicle from its load based on machine vision technology and deep learning algorithms. The vehicle information (i.e., type, weight, position, and motion trajectory, etc.) is conveniently obtained from a roadside monitoring surveillance camera, while the axle-weight distribution interval for nine classified vehicle types is obtained from the statistical information of 8,402 delivery vehicles from which the relationship between a unique vehicle type and the corresponding weight information is established. Meanwhile, a dataset containing 8,624 vehicle images was established for training the deep convolutional neural network (DCNN), where nine rough-grained vehicle classifications were contained in order to enhance the generalizability of the network. Optimization analysis was conducted to improve the network accuracy in vehicle types identification. The position of vehicles can also be effectively detected by a faster region-based convolutional neural network (Faster R-CNN), where the pre-trained DCNN with 98.17% vehicle types classification accuracy is employed as the co-shared network layer to enhance computation efficiency. Utilizing the object detection results from the Faster R-CNN and utilizing a Kalman filter, a vehicle in motion could also be simultaneously real-time tracked by the monitoring video, while a graphical user interface (GUI) incorporated into the video camera enabled automatic identification. A post-processing module has been established based on the proposed method, and a field test was conducted to validate the reliability of the system.

Non-contact weigh-in-motion approach with an improved multi-region of interest method

Statistical Analysis of Site-specific Traffic Load Using Weigh-in-Motion Data

Fusion of Computer Vision and Piezoelectric Tactility Approach to Measuring Moving Vehicle Loads

Wavelet domain analysis for identification of vehicle axles in the application of BWIM technology

Vehicle weigh-in-motion technology

Vehicle Weigh-in-Motion System Based on Soft Capacitive Weighing Sensor

Intelligent Weigh-in-Motion System Using Embedded MEMS Sensors for Pavement Monitoring

Design of a Capacitive Flexible Weighing Sensor for Vehicle WIM System

Optimised Autocalibration Algorithm of Weigh-In-Motion Systems for Direct Mass Enforcement

Vehicle weight identification system for spatiotemporal load distribution on bridges based on non-contact machine vision technology and deep learning algorithms

A Capacitive Flexible Weighing Sensor and Weighing Measurement

Assessing Vehicle Wandering Effects on the Accuracy of Weigh-in-Motion Measurement Based on In-Pavement Fiber Bragg Sensors through a Hybrid Sensor-Camera System

Capacitive Flexible Weighing Sensor for WIM System

A New Strategy for Dynamic Weighing in Motion of Railway Vehicles

Development and Validation of a Weigh-in-Motion Methodology for Railway Tracks

Field Investigation of Novel Self-Sensing Asphalt Pavement for Weigh-in-Motion Sensing

Improvement of vehicle axle load test method based on portable WIM

Incorporating Site-Specific Weigh-in-motion Data into Fatigue Life Assessment of Expansion Joints under Dynamic Vehicle Load

A novel traffic conflict risk measure considering the effect of vehicle weight

Novel Weigh-in-Motion Pavement Sensor Based on Self-Sensing Nanocomposites for Vehicle Load Identification: Development, Performance Testing, and Validation

A computer vision-assisted method for identifying wheel loads of moving vehicles from dynamic bridge responses