Abstract:This study presents a facile and low‐cost protocol to improve the biocompatibility of clear photoresins that feature prominently in light‐actuated 3D printing methods such as stereolithography and digital‐light printing. Using a combination of isopropanol washes with a short post‐UV photocuring, a dramatic minimization of cytotoxicity can be obtained to expand the use of such resins for various biodevice applications. Light‐based 3D printing techniques, including stereolithography (SLA) and digital light processing (DLP), are of great utility owing to their ability to create complex geometries with high speed, high spatial resolution, and often, optical transparency. These are useful for fabricating custom components and structures for various biomedical applications—scaffolds, implants, microfluidic devices, in vitro cellular experiments, etc. However, a drawback of light‐based methods is that uncured resin monomers and other additives have the potential for cytotoxic effects, adversely impacting cells and tissues. In this study, we investigate a facile method to process light‐based 3D printing to mitigate cytotoxicity. Three optically clear, photocurable resins—a commercially available acrylate‐based resin, BioMed Clear, and an ecoresin derived from soybean oil—are subjected to various post‐treatment protocols. These involve combinations of isopropanol (IPA) washing, UV curing, and water or IPA agitation. The in vitro cytotoxicity and effect on cell proliferation are characterized using two cell lines (myoblasts and fibroblasts). Compared to untreated controls, IPA or water wash, and cleaning with a commercial developer, the results indicate that a short postprint cure with double IPA wash effectively reduces cytotoxicity across all resins, particularly BioMed Clear and ecoresin, maintaining nearly 100% cell viability after 7 days and avoiding material cloudiness or brittleness. The study therefore highlights a low‐cost postprint treatment method applicable to existing commercial resins and 3D printers. The minimization in leachate and cytotoxicity of optically clear 3D‐printed parts can pave the way for broader adoption in resource‐limited settings and safer use in cell studies, microfluidics, and other biomedical applications.

Increasing resolution in additive manufacturing by using high-performance and non-toxic photoinitiating systems

Efficient 3D Printing Via Photooxidation of Ketocoumarin Based Photopolymerization

Solvent-Free Digital Light 3D Printing using Biodegradable Polymeric Photoinitiators

Additive and Lithographic Manufacturing of Biomedical Scaffold Structures Using a Versatile Thiol-Ene Photocurable Resin

Cytotoxicity, Colour Stability and Dimensional Accuracy of 3D Printing Resin with Three Different Photoinitiators

Photocurable biomaterials labeled with luminescent sensors dedicated to bioprinting

Recent Trends in Advanced Photoinitiators for Vat Photopolymerization 3D Printing

Urethane dimethacrylate-based photopolymerizable resins for stereolithography 3D printing: A physicochemical characterisation and biocompatibility evaluation

3D Printing in Pharmaceutical and Medical Applications – Recent Achievements and Challenges

Engineering multifunctional UV-polymerizable imidazolidinyl urea-based methacrylate resin for 3D printing: Synthesis, characterization, and antimicrobial properties

Towards safe phosphine oxides photoinitiators with good cytocompatibility for 3D printing of thermoplastics

3D Inkjet Printing of Biomaterials with Solvent‐Free, Thiol‐Yne‐Based Photocurable Inks

Post‐Print Processing to Minimize Cytotoxicity of 3D‐Printed Photopolymer Resins for Biomedical Applications

Visible Light Photoinitiator for 3D-Printing of Tough Methacrylate Resins

Recent Advances in 3D Printing of Photocurable Polymers: Types, Mechanism, and Tissue Engineering Application.

Novel Materials for 3D Printing by Photopolymerization

Challenges and Opportunities in 3D Printing of Biodegradable Medical Devices by Emerging Photopolymerization Techniques

Highly Reinforced Acrylic Resins for Hard Tissue Engineering and Their Suitability to Be Additively Manufactured through Nozzle-Based Photo-Printing

Photocurable High-Energy Polymer-Based Materials for 3D Printing

(Meth)acrylate-Free Three-Dimensional Printing of Bio-Derived Photocurable Resins with Terpene- and Itaconic Acid-Derived Poly(ester-thioether)s

Optimising the biocompatibility of 3D printed photopolymer constructs in vitro and in vivo