Development of high-energy non-aqueous lithium-sulfur batteries via redox-active interlayer strategy

Byong-June Lee,Chen Zhao,Jeong-Hoon Yu,Tong-Hyun Kang,Hyean-Yeol Park,Joonhee Kang,Yongju Jung,Xiang Liu,Tianyi Li,Wenqian Xu,Xiao-Bing Zuo,Gui-Liang Xu,Khalil Amine,Jong-Sung Yu

DOI: https://doi.org/10.1038/s41467-022-31943-8

IF: 16.6

2022-08-08

Nature Communications

Abstract:Abstract Lithium-sulfur batteries have theoretical specific energy higher than state-of-the-art lithium-ion batteries. However, from a practical perspective, these batteries exhibit poor cycle life and low energy content owing to the polysulfides shuttling during cycling. To tackle these issues, researchers proposed the use of redox-inactive protective layers between the sulfur-containing cathode and lithium metal anode. However, these interlayers provide additional weight to the cell, thus, decreasing the practical specific energy. Here, we report the development and testing of redox-active interlayers consisting of sulfur-impregnated polar ordered mesoporous silica. Differently from redox-inactive interlayers, these redox-active interlayers enable the electrochemical reactivation of the soluble polysulfides, protect the lithium metal electrode from detrimental reactions via silica-polysulfide polar-polar interactions and increase the cell capacity. Indeed, when tested in a non-aqueous Li-S coin cell configuration, the use of the interlayer enables an initial discharge capacity of about 8.5 mAh cm −2 (for a total sulfur mass loading of 10 mg cm −2 ) and a discharge capacity retention of about 64 % after 700 cycles at 335 mA g −1 and 25 °C.

multidisciplinary sciences