Abstract:Abstract Metronidazole (MNZ) is one of the pharmaceutical products which is considered as one of the most important pollutants in the environment due to its wide use and resistance to biodegradation. Hence, the purpose of this study is the optimization of the electrochemical degradation of the metronidazole (MNZ) antibiotic using electrochemical oxidation on a stainless steel316 coated with beta lead oxide (SS316/β-PbO 2 ) anode. In the studied electrochemical process, the response surface methodology (RSM) involving a five-level ((pH (A) and electrolysis time (B), current density (C), and MNZ concentration (D)). The central composite design (CCD) was employed for optimizing and modeling of the electrochemical process in the degradation of MNZ. The preparation of SS316/β-PbO 2 anode was accomplished using the electro-deposition method. Scanning electron microscope (SEM), energy-dispersive X-ray (EDX), and X-ray diffraction (XRD) analyses were conducted for accurate evaluation and characterization of the coated electrode. The effect of influencing factors on electrochemical degradation of MNZ was studied, and the highest MNZ degradation efficiency was observed to be 98.88% after 120 min under the optimal conditions including the supporting electrolyte concentration of 1.0 g/100 cc, the initial MNZ concentration of 30.1 mg/L, pH of 4 and the current density of 9.99 mA/cm 2 . The linear regression coefficient ( R 2 ) between experiments and different response values in the model was 0.99. Moreover, the statistical analysis of the results indicated that in the range studied, the most effective parameters in MNZ degradation are MNZ concentration and pH. In general, it can be concluded that the electrochemical process using SS316/β-PbO 2 anode can effectively eliminate metronidazole, and it can be considered as an efficient method in the degradation of various pollutants.

Degradation of metronidazole during the UV 365 -LED /chlorine process: Kinetics, influencing factors, and halonitromethanes formation

Mechanistic studies of Microcystic aeruginosa inactivation and degradation by UV-C irradiation and chlorination with poly-synchronous analyses

Efficient degradation of dimetridazole during the UV/chlorine process: Kinetics, pathways, and halonitromethanes formation

Degradation kinetics, byproducts formation and estimated toxicity of metronidazole (MNZ) during chlor(am)ination

Photocatalytic degradation of metronidazole (MNZ) antibiotic in aqueous media using copper oxide nanoparticles activated by H2O2/UV process: Biodegradability and kinetic studies

Analysis of degradation kinetic modeling and mechanism of chlorinated-halonitromethanes under UV/monochloramine treatment

Accelerated degradation of micro-pollutant by combined UV and chlorine dioxide: Unexpected inhibition of chlorite formation

Degradation Of Aqueous Polycyclic Musk Tonalide By Ultraviolet-Activated Free Chlorine

Effective Degradation of Metronidazole through Electrochemical Activation of Peroxymonosulfate: Mechanistic Insights and Implications

Metronidazole Degradation by Physico-chemical and Advanced Oxidative Processes: Influence of pH and nTiO2-Functionalized Macroporous Support

Degradation of Chloramphenicol by UV/chlorine Treatment: Kinetics, Mechanism and Enhanced Formation of Halonitromethanes

Degradation behaviors of Nabumetone and its metabolite during UV/monochloramine process: Experimental and theoretical study

Degradation and Detoxification of Microcystin-Lr in Drinking Water by Sequential Use of UV and Ozone

DEET degradation in UV/monochloramine process: Kinetics, degradation pathway, toxicity and energy consumption analysis

Enhanced ronidazole degradation by UV-LED/chlorine compared with conventional low-pressure UV/chlorine at neutral and alkaline pH values.

Enhanced 2-MIB degradation by UV-LED/chlorine process: reaction kinetics, wavelength dependence, influencing factors and degradation pathways

Degradation of micropollutants in flow-through UV/chlorine reactors: Kinetics, mechanism, energy requirement and toxicity evaluation

Degradation of sulfonamide antibiotic via UV/MgO2 system: kinetic, application, and mechanism

The electrochemical degradation of the metronidazole (MNZ) antibiotic using electrochemical oxidation on a stainless steel316 coated with beta lead oxide (SS316/β-PbO2) anode

Degradation of Trimethoprim Using the UV/Free Chlorine Process: Influencing Factors and Optimal Operating Conditions

Chemical behaviors and toxic effects of ametryn during the UV/chlorine process