Abstract:Tin dioxide (SnO2) has been considered one of the most promising alternative anode materials for lithium batteries. In the past two decades, extensive studies have been directed to gaining a fundamental understanding of the lithiation/delithiation reactions to improve the performance of SnO2-based electrodes. However, the realization of full capacity of SnO2 anode has been hindered by the large initial irreversible capacity loss characterized by low initial Coulombic efficiency (ICE). This is generally attributed to the inferior reversibility of conversion reactions between Sn0/Li2O mixture and SnO2, and highly correlated to the poor stability of the nanostructure of Sn/Li2O mixture. Here we demonstrated that Li2O can indeed be highly reversible in a SnO2 electrode with controlled nanostructure and achieved an initial Coulombic efficiency of ~95.5%, much higher than that previously believed possible (52.4%). I nsitu spectroscopic and diffraction analyses corroborate the highly reversible electrochemical cycling, suggesting that the interfaces and grain boundaries of nano-sized SnO2 may suppress the coarsening of Sn and enable the conversion between Li2O and Sn to amorphous SnO2 when de-lithiated [1]. Furthermore, we have found that the application of super-elastic films of NiTi alloy could accommodate the internal stress and volume change of lithiated nano-SnO2 layer and thus effectively suppress Sn coarsening, to retain the high reversibility of the SnO2 layer with reversible capacity more than 800mAh/g (based on SnO2) for over 300 cycles, demonstrating stable charge capacities of ~400mAh/g in the potential ranges of 0.01-1.0V and 1.0-2.0V(vs. Li/Li+), respectively[2]. To greatly enhance the stability of the Sn nanostructure and the reversibility of conversion reactions in lithiated SnO2, a series SnO2-M-G (M=Fe, Mn, Co) ternary nanocomposites have been produced by scalable ball milling [3]. The SnO2-M-G nanocomposites demonstrate very high ICEs of up to 88.6%, which is the highest values among those reported so far for SnO2-based powder anodes. The SnO2-Fe-G maintains a capacity of 1338 mAh/g after 400 cycles at a current rate of 0.2 A/g, while the SnO2-Mn-G retains an excellent long-term stable capacity of 700 mAh/g throughout 1300 cycles at 2 A/g. Even in soft-packing full cells constructed with LiMn2O4 cathode, a high capacity retention of 85.1% can be maintained after 100 cycles operating in the range 0.5–3.8 V. All these data indicate the promising potential of SnO2-M-G as an interface material for high-performance anodes in lithium ion batteries. References: [1] R. Hu, D. Chen, G. Waller, Y. Ouyang, M. Zhu, M. Liu. Dramatically enhanced reversibility of Li2O in SnO2-based electrodes: the effect of nanostructure on reversible capacity Energy Environ. Sci. , 2016, 9: 595. [2] R. Hu, Y. Ouyang, D. Chen, H. Wang, M. Zhu, M. Liu. Inhibiting Sn coarsening and enhance the reversibility of conversion reaction in lithiated SnO2 anodes by application of super-elastic NiTi films Acta Mater. , 2016, 109:248 [3] R. Hu, Y. Ouyang, T. Liang, H. Wang, J. Chen, M. Zhu. Stabilizing nanostrucutre of SnO2 anodes by transition metals: a route to achieve high initial Coulombic efficiency and stable capacities for lithium storage Adv. Mater. , 2016, in press

Anionic Oxygen Redox in the High-Lithium Material Li 8 SnO 6

Li8MnO6: A Novel Cathode Material with Only Anionic Redox

Tuning Anionic Redox Activity and Reversibility for a High‐Capacity Li‐Rich Mn‐Based Oxide Cathode via an Integrated Strategy

Destabilization of Oxidized Lattice Oxygen in Layered Oxide Cathode.

Metal–oxygen decoordination stabilizes anion redox in Li-rich oxides

4D Lithium-Rich Cathode System Reinvestigated with Electron Paramagnetic Resonance: Correlation Between Ionicity, Oxygen Dimers, and Molecular O2.

Oxygen-redox Reactions in LiCoO2 Cathode Without O–O Bonding During Charge-Discharge

Achieving Stable Anionic Redox Chemistry in Li-excess O2-type Layered Oxide Cathode Via Chemical Ion-Exchange Strategy

Weak σ–π–σ Interaction Stabilizes Oxygen Redox towards High-Performance Li–rich Layered Oxide Cathodes

Highly reversible oxygen redox in layered compounds enabled by surface polyanions

Direct Visualization of the Reversible O2-/O- Redox Process in Li-Rich Cathode Materials

Anionic Redox Reaction and Structural Evolution of Ni-rich Layered Oxide Cathode Material

Regulating oxygen covalent electron localization to enhance anionic redox reversibility of lithium-rich layered oxide cathodes

Toward Reversible Conversion Reactions and High Initial Coulombic Efficiency in Lithiated SnO2 Based Anode Materials

Regulating Anionic Redox Activity of Lithium-Rich Layered Oxides Via LiNbO3 Integrated Modification

Rethinking Oxygen Redox: Does Oxygen Dimerisation Occur without Oxidation in Li2NiO3?

Stabilized Anionic Redox by Rational Structural Design from Surface to Bulk for Long-Life Fast-Charging Li-Rich Oxide Cathodes

Stabilizing Anionic Redox Chemistry in a Mn‐Based Layered Oxide Cathode Constructed by Li‐Deficient Pristine State

Modulating Local Oxygen Coordination to Achieve Highly Reversible Anionic Redox and Negligible Voltage Decay in O2‐Type Layered Cathodes for Li‐Ion Batteries

Peroxo Species Formed in the Bulk of Silicate Cathodes

Regulating Anion Redox and Cation Migration to Enhance the Structural Stability of Li-Rich Layered Oxides